Origami bow: DIY decoration for a man. Origami paper bow Other paper bow designs

Often, to fulfill our decorating ideas, you may need a regular paper bow. How to make it? There are many options, from using paper ribbons to papier-mâché. In this article we will learn how to make a bow out of paper using the origami technique, the folding diagram of which will be our assistant.

Today, the bow is, first of all, a symbol of a gift. But at the same time it is also a symbol of style that came to us from antiquity, when it was an adornment not only for women, but also for men. Also, a bow in some cultures was considered a symbol of love, the union of two people, perhaps due to the fact that the ribbons, when tied, form an inverted figure eight - a symbol of infinity.

Origami bow with ribbons

First of all, we will make a classic bow using the origami technique. This bow is perfect for decorating a cake or candy box, or for a postcard. You can use single-sided colored paper or double-sided paper, sheet size 8*8 cm, but you can do more, of course.

1. Place the sheet with the colored side down.

2. Fold in half.

3. And fold it in half again, but now across.

4. Expand the sheet. It turns out that it is divided into 4 equal fragments by fold lines.

5. Now fold the sheet diagonally. We also get a fold in the shape of the letter “X” on the sheet.

6. Bend the sheet along the lines as in the photo.

7. Bend the upper corner 1 cm towards you.

8. Unfold again. There should be a small square inside the sheet.

9. We iron the lines of this square and the diagonals of the sheet well.

10. Now we must bend the square inward to get this shape.

11. We get a two-layer blank.

12. Bend the upper sides towards you.

13. Turn the workpiece over to the reverse side and repeat the steps.

14. Turn it inside out and carefully cut the paper along the lines in the photo. These will be the bow ribbons.

15. Carefully unfold, we get such a blank.

16. After this, bend the upper part of the tape towards you, bend the sides as in the photo. We do this on both sides.

17. Cut the tail of the bow along the center line and fold the edges.

18. Turn the bow over to the front side.

19. Bend the ends of the bow ears towards the center and insert them into the square.

20. The ribbons can be cut or left as is.

Ready! Now you know how to make an origami bow out of paper quickly and easily.

The bow tie

A butterfly bow using the origami technique is made from a rectangular sheet of paper. The video uses a strip measuring 21.5*9 cm. If you use a longer strip of the same width for work, the “ears” of the butterfly will be longer. If the proportion is suitable, but you need to make the bow larger or smaller, then you need to change both the length and width equally. Also, experiment with different rectangular sheets of paper, there are no restrictions regarding sizes.

In order for the butterfly bow to come out smooth and neat, you need to ensure that all the elements are folded symmetrically. The stage of bending the middle line, to which the edges and lines of the workpiece are then folded, is very important. The same goes for the transverse fold: when all the triangles have been folded inward, we check all the outer corners so that they do not warp in relation to each other.

Step-by-step instructions are presented in the video.

A finished paper bow tie can be colored with paints, pencils or felt-tip pens, or you can use wrapping paper with a pattern - it will turn out very bright and original, and shiny - also elegant.

It will also be useful to learn other ways on how to fold an origami paper bow; we present a video with various techniques below.

Let's make it beautiful bow in technology origami in just a few simple steps. The beauty of the art of paper folding is its accessibility and simplicity. At the same time, the result is always pleasing.

A beautiful bow is perfect for decorating a holiday card, children's applique. It will take you only 10-15 minutes to complete the craft.

How to make an origami bow

For the bow you will need a square sheet of any color. The size also depends on how big the bow you need. I take a square with a side of 10 cm. Use thick paper, you can use special paper for origami. The optimal density is 80-100 g/sq. m.

To begin, mark vertical and horizontal folds on the sheet. Then fold it diagonally. The result will be a markup like this. It is needed to be folded without problems - this is one of the basic forms of origami, which is often used for different models, for example, for.

To get the desired shape, remove the side sectors inward along the marked lines. Bend the top of the resulting rhombus down, stepping back slightly from the edge. For ease of assembly, iron the fold in two directions.

Move the top inward along the marked lines. To do this, first unfold the sheet and then fold it again, but it will no longer have a protruding upper tip. For the resulting figure, bend the sides that are closer to the top, hidden inside. Do the same on the second invisible surface.

Flatten the sheet again. Along the convex folds, make cuts in four places, not reaching the center. The central square will help you navigate. Assemble the figure again so that the central square appears - this is the front side. Turn the workpiece inside out.

Now we work with the side squares. Fold the sides of one of them towards the center to form a triangle at the end. Do the same with the second one. Point the top square down so that it connects with the bottom one. Turn the bow over to the front side.

Cut the bottom piece in half lengthwise to create two equal pieces. Remove the side sections from the wrong surface. Turn it back over and check that everything is neat.

There are a few finishing touches left. Place the side ends of the bow into the holes in the square center. The lower ones can be cut to give them the desired size and shape. A beautiful bow using the origami technique is ready!

When we are faced with the question of a gift, we always wonder how to effectively present it in order to surprise the person for whom this gift is intended. The best thing, of course, is to make a beautiful package for it or a bright bow that will attract attention. In order not to pay a lot of money for such a trifle, you can make it yourself from beautiful paper, or, as is now fashionable, from parchment paper, magazine sheets or newspaper. And then decorate the packaging with a beautiful bow, which you can also make yourself. Therefore, today we will teach you how to make an origami bow out of paper. This activity will not take you much time, but then this bow will definitely come in handy more than once.

Let's try to start simple

Today we will learn how to make bows for gift wrapping using the origami technique. This is what they are like.

They are all made almost the same, only they have different ends and different colors of paper.

We choose the color that matches our gift or its packaging, just not in the same color so that it does not merge with the packaging, but in a different shade.

Let's move on to the bow assembly diagram:

For this craft we will need a square sheet of paper.

Let's put it down with the main color if it's not solid. Fold it in half only so that the drawing is inside. Now fold it in half again. We lay it back out, and now with the pattern facing outwards, we fold our sheet of paper diagonally, turn it over 90 degrees and fold it again diagonally. And open it back up. Now we need to bend the right and left corners inward as indicated in the diagram. Fold the top corner to form a small triangle. And again we lay out our workpiece, now a small square with folds should remain in the center.

Then we need to straighten the small square that is in the center with our fingers forward so that all sides remain a little behind. Next, we bend the sheet as shown in the photo, only so that this square is inside the workpiece. Now we need to bend the top sides, as in the diagram, and then turn the workpiece over and bend the other top sides in the same way. And again we open our workpiece so that there is a square in the center and smooth out all the folds very well.

Turn the workpiece over so that the colored side is at the bottom. Let's use scissors and make four cuts along the folds. Now you need to fold the top cut fold down, and also fold the two upper corners down to the middle, these will be the tips of our future bow. Next, we bend both rhombuses upward, and again fold only the lower corners to the middle line. Now again we need to lower the double diamond part down. And make a small cut, as done in the photo, and bend these parts.

Now turn the bow over to the front side. We bend the two extreme corners to the center and insert them into the small square that is in the middle. Here is our gift bow and it’s ready. It can also be used to decorate a room, a holiday, or decorate a Christmas tree.

You can also make a bow like this. It is done much easier and faster.

Butterfly shape

Using this technique we can also make a butterfly bow, which we can also decorate any gift with. Let's see what they are like.

Now let's move on to the step-by-step instructions and start making our butterfly bow.

Let's take a small rectangular sheet of paper, about 20/8, but you have the right to choose the size yourself. Let's bend it in half and straighten it back, marking the center line.

Now we turn all four corners of the workpiece to the center line, as shown in the diagram.

Fold the top and bottom sides of our rectangle in half towards the center line.

Now we bend the entire workpiece in half.

On the side that remains flat, we outline two corners above and below.

We bend these marked corners inward.

Now we bend this part of the workpiece to the left. And repeat the same on the other side.

Then you need to add two corners to the center line, first on one side and then on the other, all this is shown in the diagram.

And we fold two folds again to the center line on both sides.

The place that is marked in circles in the diagram means that you need to hold it, you need to turn it to the right.

And then bend it inward, and now our butterfly bow is ready. You can fold it from ordinary white office paper, and then paint it yourself, or you can fold it straight from beautiful colored paper.

Video on the topic of the article

Now we invite you to watch a selection of videos that tell you in more detail how you can make a bow and a butterfly bow out of paper.

This origami bow, made of paper, can decorate both a gift box and the interior of your apartment for the holiday. Strictly speaking, this model is not origami, since scissors are used in its production, but this does not lose its charm. For an origami bow, it is best to use not too thick, bright paper. It would be nice if the paper already has a printed design. Such paper is sold, for example, in origami kits. True, it is quite expensive. You can also take wrapping paper left over from old gifts. This is not the easiest paper craft to make. Children aged 8 years and older can cope with such a bow. If your baby is much younger, then you can do this with him.

How to make an origami bow

For this bow you need to take a square of colored paper. Fold the square in half four times as shown. The picture shows the reverse side of the craft.

Using the marked lines, fold the basic origami pancake model.

Fold the top corner towards you.

Open the model completely.

And fold it back so that the folded corner is inside the model.

We make side folds on one side of the origami model.

We turn the model over and also fold the folds on the other side.

We unfold the model, turn it over to the front side and straighten the middle (square).

We turn the model inside out again.

Using scissors, we make cuts along the folds, without cutting all the way through.

We bend one quarter of the square down.

We bend the corners on both sides, as shown in the figure.

The model has two layers of paper on the bottom. Using scissors, cut both layers in the middle, to the central square.

Paper crafts bring emotional pleasure and material benefits, help to decorate objects with taste, and fill the house with a festive atmosphere. A product such as an origami bow is universally applicable. You can construct several variants of models from paper of different textures and colors. One will look like a blooming flower, the other will look like a butterfly or an infinity symbol.

Making and types of origami bows

The bow as a decoration has a deep history. It can be seen in the paintings of ancient masters of the Renaissance, depicting noble women in fashionable clothes for that time. Having passed through centuries in almost unchanged form, it still has not lost its relevance and popularity. Now it is an indispensable element of various accessories: handbags, cosmetic bags, hair jewelry, belts, stage costumes. They decorate gift boxes, New Year trees, and greeting cards. Multi-colored garlands of bows make the room bright and original.

There are several types of origami bows. Their schemes are somewhat similar, but there are also differences in execution. For example, a rectangle model is made very simply and quickly, while another is based on a square, and the process is a little more complicated.

The main raw material for origami crafts - paper - is completely different, both in quality and in color. There are no rules and regulations here. For creative solutions, even a narrow strip of photographic film is suitable, which will create a unique vintage packaging style.

It is always preferable to start mastering something with a simple option in order to understand the principle of operation. Therefore, first we will look at how to make an origami bow-butterfly.

The main stages of creating a craft

The materials needed are limited to just the choice of paper. She may be:

• white;
• color (single-sided or double-sided)
• gift (shiny);
• glossy - from a magazine or advertising brochure;
• newspaper;
• multi-colored office;
• sheet size 22.5 cm by 10 cm.

The main action is production:

The product is ready. With little skill, it will take no more than a minute to complete.

You don’t have to change the color, leaving it in a local form; also, if you have a desire or a specific task has been set, you can simply decorate it or stick on bright appliqués.

The next model is a little more complicated and has a more elegant shape. Using it as a decorative detail will give the most simple item a festive touch.

Step by step, based on detailed descriptions and images, we will learn how to create cute, charming bows.

Here, in addition to paper, you will have to use a stationery knife or scissors to form ribbons.

The key shape of the accessory is a square:

In the photo, the ribbons are left as is, but for beauty it is better to cut off the long tails with curly triangular cutouts.

Other paper bow patterns

The samples presented are the most common, frequently used forms. In addition to them, there are many interesting, unusual design ideas of various configurations.

Such bows and bows can and should be made together with children, involving them in the process of arts and crafts, instilling a sense of beauty and developing artistic and spatial vision.

This style will look elegant:

• Prepare 6 small rectangular sheets from blocks of office paper of different colors. Five of them should be small and clearly proportional in length. You will use them to make a bow, and use the sixth one for the middle fastening;
• bend everything one by one in the form of a classic “accordion” so that the edges are the same in width;
• fold in successive layers - from largest to smallest, pinch in the middle with your fingers, fasten with something;
• Cut a strip of any color and apply glue to the ends. Apply glue to the edge of the craft in the center;
• wrap the strip, folded into a ring, around the middle, straighten the wings on both sides, if necessary, trim the edges for evenness.

The bow turns out delicate and elegant. In one evening of joint effort, you can make a magnificent garland for any celebration.

Another option is distinguished by the splendor and luxury of the image. It looks more like a bow-flower, reminiscent of a blossoming peony.

This is done using special double-sided tape (if not, you can join it very carefully with a glue stick) and narrow strips of colored double-sided paper:

• cut 6 or 8 pieces measuring 6-7 by 1.5 cm and one very small one - to decorate the center of the bow;
• fold each one in the shape of a figure eight, connecting with pieces of tape;
• Also, using tape, combine all the folded petals according to the principle of a snowflake - first crosswise, then diagonally. Place a paper ring in the middle as a finishing element.

This is what you should end up with:

This bow is appropriate to decorate both an expensive gift and a box with a cake.

Try and experiment. If the first time it doesn’t quite work out the way you want, be patient and repeat again and again, developing skill and ability.

Having mastered the origami technique, you can easily save money on expensive packaging services and party decorations, delighting yourself and your family and friends.

Attention, TODAY only!