On which hand is the security chevron worn? How to sew on stripes and chevrons

Each private security company (PSC) has its own charter, which contains basic information about the procedure and conditions for the functioning of the company. In addition, it can regulate the requirements for employee uniforms and the location of chevrons and stripes on it. If the charter does not contain this information, you should use the standard recommendations described below.

The largest chevron is attached to the back of the jacket, usually its length is 20-30 cm. The patch with the inscription is located at the level of the shoulder blades, and with the image - in the center of the back.
Chevrons with the designation of a specific private security company are sewn onto the left sleeve (at a distance of 8-10 cm from the shoulder seam), and general stripes, for example, emblems with the symbols of the Russian security service, are sewn onto the right sleeve.
A chevron with the blood type is sewn onto the right breast pocket of the jacket. On the left side there is usually a badge with the employee’s name and surname or the inscription “security”.
Sometimes the headdresses have the emblem of the enterprise, the inscription “security” or a “security” patch. It would be correct to place them in the front center of the cap or hat.

We hope you found this article helpful. We remind you that the rules for the placement of chevrons are advisory in nature. Before attaching, you should first familiarize yourself with the charter of a particular private security company.

Private security companies appeared in the USSR during the era of perestroika, but were officially enshrined in legislation in 1992. The activities of private security companies are regulated by the Law on Private Detective and Security Activities in the Russian Federation of March 11, 1992.

Security guard patches are very varied. Below we will tell you about them and explain how to sew them correctly. We also do machine embroidery and will make you patches according to your design!

Security chevrons

A necessary thing in every private security company is security emblems. They are required when organizing, they increase the rating of the ORR. You can't go anywhere without them!

Various symbols are used to create such emblems. State symbols of the Russian Federation are often used: the coat of arms, the flag. Sometimes elements of uniform patches are used: these can be emblems of military branches, recognizable symbols. Ancient heraldry is often used: lions and bears proudly grin from the emblem of the ChOO, symbolizing the courage and bravery of their bearers.

"Security" patch

In addition to various emblems, inscriptions are also used. The Security patch is the most popular of them. It is often embroidered with reflective threads, or threads that glow in the dark. This allows the guard to demonstrate his status even at night or in a dark room.

A large “Security” patch on the back is also a common attribute of a security guard. This patch is sewn onto a jacket or uniform. Shoulder stripes are also ordered as a set.

Private Security Form

Currently, each security organization chooses its own uniform, but this is not the case everywhere. For example, in Novosibirsk a common uniform has been introduced for all private security companies, which can only be distinguished by their chevron.

This form of private security company is modeled after other government services: the Ministry of Internal Affairs, Russian Railways and others. The correct placement of chevrons plays an important role.

On the back of the jacket there is a large “Security” patch made of yellow reflective material. On the left side of the chest there is a small “Security” badge. On the right side of the chest there is a badge with the name of the guard. On the left shoulder there is a chevron with the coat of arms of the Russian Federation and the inscription “Security”. On the right sleeve there is a CHOP chevron.

If your private security company does not have special rules for wearing a uniform, then it is better to follow the above instructions.

Security chevrons: how to sew

Many people are tormented by the question of how to sew on a security guard's chevron.

There are no such strict rules as in the army. Each private security company has its own charter, where you should look for information on how to properly sew on security guard chevrons. However, we can give some general recommendations.

CHOP chevrons usually come in three types: chest, sleeve, and back. The easiest one to distinguish is the one on the back: it is the largest. Chest and sleeve chevrons are often the same, but sometimes only the emblem is attached to the sleeve, and the surname or the inscription “Security” is attached to the chest.

So. Sew the back patch in the center of the back if it is an emblem, and if it is an inscription, closer to the top. Sew the chest patch above the pocket. The sleeve patch is sewn either over the pocket, if there is one, or so that there is 8 cm from the top of the patch to the shoulder seam.

If the location of the chevrons on a security guard’s uniform is not specified in your regulations, then you should sew them on exactly this way.

The sleeve chevron is usually attached to the left sleeve, and the blood type patch is on the left pocket.

Security emblems on hats

Not every private security uniform includes hats, but sometimes it is necessary to apply the emblem there too. Most often, caps are used, sometimes hats, even baseball caps.

In such cases, the emblem of the private security company or the inscription “Security” is located on the front of the product in the center. You can sew on a patch, or you can embroider on the product itself.

Security patches in Prostovyshivka

Any emblem will become a patch, you just need to convert the image into stitch format. This is called layout rendering. In a special program, our designer will prescribe the settings for each stitch. This is complex work, on which the result directly depends, so the layout is paid separately and once and costs 500-2000 rubles. When you order more than 500 copies, we make it for you free of charge!

You personally approve the layout, and then we embroider a trial copy on our material. Only after the sample is approved is the entire edition embroidered. The price for application depends on the number of stitches. To make it easier for you to navigate, we have compiled a table of the approximate cost of embroidery depending on its size.

Since childhood, many young men dream of wearing a strict uniform, embroidered with various orders. Over time, the understanding comes that it is not so simple. And health does not always allow you to go to military service. Some are upset, believing that their childhood dream is ruined, while others are looking for alternative options. Firefighters, Ministry of Emergency Situations, police, security... And many more different areas. And what? The same shape that makes a girl's eyes sparkle. And there is a chance to receive the order. True, you don’t need to sew it on. You need to think about how to sew on a security guard chevron, for example. By the way, an excellent option.

Probably, many people are faced with the same problem - how to correctly place stripes and chevrons on clothes. In fact, there is no definite rule; most often these conditions are spelled out in the regulatory documents of security companies and agencies. When this is not the case, take 8 cm from the shoulder seam of the right sleeve. It is worth noting that the chevron patch should be treated very responsibly, because it is the business card of a security guard. If the symbol is sewn crookedly or ugly, then it is unlikely that the enterprise will be taken seriously. In order not to make a mistake, before sewing on the chevron, it is worth drawing out its location on the form. It is better to do this with dry soap - these marks are clearly visible against the background and are easily erased. Still, before you get a security guard license, you need to try.

So, let's look at our drawing. You can hang the form on hangers to see the picture more clearly. The intended chevron must be exactly horizontal, and located exactly where it is prescribed. A ruler or centimeter will help with distance measurements. If there are any shortcomings, we correct them immediately. If not, we move on - take four or five pins, a chevron, a uniform and get comfortable. You need to pin the patch exactly to the sleeve. To do this, we use the previously drawn lines, inserting pins along them. Naturally, the position of the chevron also needs to be monitored. The location of the pins should not be where the seam will go - you can roughly navigate by the chevron pattern, the threads should not be visible.

Since getting a security guard's certificate is easier than joining the same police force, for example, quite a few people struggle with chevrons. And in order not to repeat their mistakes, let's move on to the next step. The chevron is on the sleeve, attached with pins, and, of course, has already been examined more than once - after all, the result must be perfect. And if everything is exactly like this - the chevron clearly occupies its pedestal - then sew it on for now. Using strong threads, only matching the color of the pattern of the patch - so that they blend together. Sew on the inside, carefully. The thread must be tightened, otherwise over time the work will dangle on your shoulder. Anyone who wants to become a defense attorney knows how to obtain a private security guard certificate. But not everyone is ready to prepare their own form.

The work of a security guard in large populated areas has become quite widespread. Particular attention is paid to the uniform of the security guard, which gives the employee a neat appearance and distinguishes him from other people inside and outside the premises. The need for such clothing arose during the period of massive emergence of security companies. Due to wear and tear, the mold needs to be replaced periodically.

Security guard uniform requirements

For security guards' uniforms, practicality during work is important. Security company personnel serve not only indoors, but also outdoors. This process continues continuously throughout the day, in any weather. In emergency circumstances, a security officer must respond quickly. The uniform should protect against unfavorable environmental factors - wind, high or low air temperature, precipitation, and also ensure freedom of movement. The fabric used for sewing must be resistant to general types of dirt and mechanical friction, and if necessary, have a water-repellent impregnation.

Workwear for security officers includes suits - summer and winter “Strike” (jacket + trousers); shirts (long or short sleeves), ties and trousers for indoor work; headwear (hats and caps, winter and summer); jumpers, sweatshirts and T-shirts. The material for the uniform is knitwear (wool with acrylic, pan; cotton) and mixed fabrics (polyester with cotton, viscose; polyester with spandex; Oxford) fabrics. Color options include camouflage, grey, blue, light blue, brown and black. Particularly important are accessories such as stripes and chevrons, which distinguish security workers from each other.

Purpose of stripes and chevrons, their placement and methods of fixation

Chevrons and stripes on a security guard’s uniform inform people around him about his functions, personal data and the name of the company.

According to the legislation of the Russian Federation, all private companies (including security companies) operate in accordance with the charter. It determines the procedure and conditions for the functioning of the company, and may also contain requirements for the appearance of personnel, the placement of chevrons on uniforms and stripes. If such rules are not written down, it is necessary to use generally accepted recommendations.

The longest patch (up to 20 - 30 cm) is attached to the back, and the image should be in the center, and the text should be at the level of the person’s shoulder blades. The chevron is placed 8-10 cm below the shoulder seams. On the left sleeve is the name of the security company, on the right are the generally accepted emblems (the inscriptions “Security” or “Security”, an image of a sword, etc.). A patch with the employee’s surname and name is attached to the left breast pockets, and the blood type is placed on the right. This arrangement of stripes and chevrons on security guards’ clothing is advisory in nature.

Inscriptions and images for chevrons or stripes are made using various printing methods or machine embroidery on fabric. The following inscriptions are applied to the stripes:

• security;
• security;
• security Service;
• security officer.

Patches come in the form of strips (sizes 120×30, 125×35, 250×75, 255×78 and 296×77 mm) or arcs (30×118 and 33×120 mm). The difference between stripes is that they are placed on the front or middle of the headdress or on T-shirts, shirts, jackets (back or chest).

Chevron is intended for clothing sleeves. In addition to the word “Security”, they depict a shield, sword and symbols of Russia (coat of arms, flag). The chevrons are the same in shape, their dimensions are 99x85, 104x87 and 105x89 mm.

There are several ways to attach chevrons and stripes to your uniform. The most convenient way is to use Velcro. You can glue them using thermal film and an iron. The most reliable method is to correctly sew these elements to the form. This is done on a machine using a sewing stitch.



The generally accepted arrangement of chevrons on a security guard’s uniform is in many ways similar to that of law enforcement agencies, but it is worth considering this issue in a little more detail. In general, this is written in detail in the order of the Ministry of Justice of the Russian Federation dated 211 On approval of the description of the uniform of employees of system bodies and the rules for wearing them. Police chevrons on which side? In general, chevrons can be sewn on the sleeve, chest and back. Badges indicating a person’s membership in various units or services are sewn in the center of the pocket or on the right sleeve. In the Other career questions section, the question on which sleeve is the security chevron with coat of arms sewn on? How to properly sew chevrons onto a security guard's uniform. As we know, previously chevrons were not sewn onto the shirt on the old police uniform. Instructions on how to sew a chevron onto a military office uniform and other clothing

Sewing stripes and chevrons to the uniform of a police officer or other department is not as easy as it might seem. Chevrons Chevron is a laconic image applied to the fabric, in our case, using how to attach a patch to clothing. Security has recently become an increasingly popular service. Many people are tormented by the question of how to sew on a security guard's chevron. On the left sleeve of a casual jacket, an insulated jacket and a shirt, 6 cm below the shoulder. There are 15 options in total. For different units, the inscription, size and color may differ, but they are still sewn in one place on the left side of the chest, 1 cm above the top seam

A chevron with the Security brand name is sewn in the middle. Yes, chevrons are sewn on both dresses with long and short sleeves. Security guard chevrons and stripes are arranged differently depending on the requirements for the uniform of employees, which are usually prescribed in. Before sewing stripes and chevrons onto the uniform, you should select. The rules for wearing insignia on uniforms are established by orders of the Ministry of Internal Affairs of the Russian Federation No. 372 dated Rules for the placement of insignia The location of chevrons on the uniform of a private security company employee. Each security company introduces its own uniform and its own rules for sewing on badges.

All paraphernalia must be sewn to uniforms using blue or black threads. Before On other types of uniforms, the chevron is sewn onto the uniform and sewn on.