How to crochet flowers from threads. Crochet flowers: patterns and descriptions for free

MULTI-TIER CROCHET FLOWER - MK

Master Class

To crochet a flower we need one skein of thin yarn, we used YarnArt Acrylic in raspberry color, and a 1.5 mm hook. The diameter of the flower with petals is 7.5 centimeters.

We start knitting the flower from the middle. We cast on six air loops, try not to knit loosely, but carefully, then the flower will look sophisticated.

1. Cast on 6 simple chain stitches.

Now we close the loops into a circle using a connecting post.

2. We close in a circle.

Now let's process the middle. We tie a double crochet around the circle and make 24 loops, much like when knitting mittens.

3. We perform 24 loops.

Our middle is ready, let's start knitting the first row. We knit a circle with a double crochet into each loop, catching only the back thread of the loop, without changing their number.

4. We knit a row with a double crochet.

Naturally, we also knit the second row with a double crochet, but the number of loops should be increased. Let's do it this way - we knit a double crochet into each loop, but, however, we carefully knit every second simple loop twice.

5. Add loops in the second row.

We knit the third row in the same way as we knitted the second - each first loop is knitted once, the second - twice, a double crochet pattern.

6. Add loops in the third row.

We knit the next row with a single crochet, grabbing both threads of the loop - front and back, we knit into each loop without changing their number.

7. We knit a row with a single crochet.

Now we will knit the first row of flower petals. For this we need scheme 1.

Scheme 1

We break the thread and tie it in a strong knot.

8. First row of petals.

Now we go back two rows below and begin to knit a row of loops knitted behind the back thread.

9. We grab the front thread of the loops of the row.

Grabbing the front one with the hook, we knit a row with a single crochet.

10. We knit a row with a single crochet.

Let’s begin to fully knit the second row of flower petals, using pattern 2.

Scheme 2

We knit a row, break the thread and tie it with a strong knot.

11. Second row of flower petals.

We go down even lower, find the previous row, knitted using the back thread.

12. We knit a row, grabbing the front front thread.

We knit a row with a single crochet, grabbing the front free thread.

13. We knit a row.

Let's start knitting the third row of petals, using pattern 3.

Scheme 3

We knit a row, break the thread and tie tightly.
We knit the fourth row of petals from the front threads of the first row.

14. We begin to fully knit the last row of petals.

According to pattern 4, we knit the fourth row of petals.

Scheme 4

We knit a row, break and tie the thread, carefully cut off all the tails.

15. Finished flower.

Our flower is ready, but something is missing. Decorate its core with a large mother-of-pearl bead.

16. Sew on a bead.

17. Knitted flower with a bead.

Now the work is finished. Let's decorate a child's panama hat with our flower.

18. Knitted flower on a hat (Panama hat). -

Flower with beads and ribbons

The flower is knitted from “Alize” Diva silk effect yarn, it is acrylic microfiber 100 grams per 350 meters, produced in Turkey. Decorated with three beads, beads and ribbons. I used hook No. 1.5.

First I knitted a spiral of petals, then a base for the spiral. I sewed the petals in a circle to the base and decorated the flower with beads and ribbons.

Knitting flowers is a very exciting and enjoyable activity, and each flower is sure to have a use, as a decoration for a blouse, handbag, hat or a surprise for a friend. Here is a collection of small miniature crocheted flowers with detailed descriptions and knitting patterns.

Flower with multi-layered petals.

Description of crochet flower:

At the beginning of knitting, we form the initial ring from the thread and knit into the ring 1st row:*Art. b/n, half-column, repeat 5 times, then tighten the ring well and secure the end of the thread. 2nd row: we knit arches for the first row of petals, for this we knit *c.b/n for a column in the first row, an arch of 3 air loops, repeat also 5 times, end the row with a connecting loop in the first table. 3rd row: From each arch, knit a half-stitch, 3 double stitches, a half-stitch, and between the arches make a double stitch. 4th row: we knit arches for the next row of petals from 5 air loops, securing them by knitting a st b/n for the leg of a st. b/n of the previous row (like a raised concave st b/n). 5th row we knit the petals from the arches by knitting a half-stitch, 5 treble stitches, a half-stitch stitch, between the arches. Next, knit according to the pattern, increasing the number of loops in the arches and tying them with a large number of s/n stitches.

Crochet flower pattern:

It is worth noting that the use of different types of yarn has its own effect when knitting a flower. For example, from a thin woolen thread we get a fluffy soft flower; when knitting flowers from cotton, the clear contours of the petals stand out, and mercerized cotton adds extra shine.

Description of knitting flowers:

In the initial ring, knit 3 chain stitches and 19 double crochets, then pull the ring and fasten the thread, make a connecting loop in the 3rd chain stitch. lifting loop. Then cut and fasten the thread for knitting the second row or make 2 air. loops and then start knitting 2nd row, knitting again *in the initial ring st. non-cash, arch of 4 air loops, st. b/n into the initial ring through 4 columns of the first row, repeat 5 times, finish the row with a connecting loop in the first column. 3rd row: knit the petals by knitting from the arches a half-column, 5 treble s/n, half-column, st b/n between the arches. 4th row: we knit arches from 5 air loops, securing from art. b/n per leg art. b/n of the previous row. 5th row: we knit petals from arches: half-column, 9 sts, half-column, sts between the arches.

Crochet flower pattern:

Knitted flowers acquire a complete look with additional decoration with a leaf, curl, or bead.

In this flower model, the number of petals increases, and fasten each next row of arches with a st. b/n for the previous arches evenly adding one more arch.

Crochet flower pattern:

Flat flowers with wavy petals.

A large number of st. gives a beautiful wave to the petals. s/n knitted from each arch.

Crochet flower:

Small flowers:

Work 5 stitches into the starting ring. b/n, through one air loop, pull the ring, make a connecting loop in the first column and knit the petals: *3 air. loops, 2 tbsp from air. loops of the previous row, 3 air. loops, connecting loop in the next column, repeat from * 5 times. In the last row we make the binding with st b/n, 4 air. loops, st. s/n at the top of the petal, dc at the base (you can tie it with a thread of a different color).

Miniature small flowers look beautiful in large quantities from different shades of yarn.

Knit 3 chain stitches into the starting ring. lifting loops instead of 1st st. s/n, 2 air. loops, then knit 5 treble stitches, through 2 air loops, pull the ring and make a connecting stitch in the 3rd lifting loop. Next, knit the petals from the arches: *3 chain stitches, 2 chain stitches, 3 chain stitches, secure them with a connecting loop, then knit a connecting stitch from the next arch and repeat from* to the end of the row.

Volumetric crochet flower.

Make 5 air loops and close them into a ring, from the ring knit a st. b/n, *dial 10 air. loops, st b/n. into a ring, then tie an arch of 10 loops with the 10th st. Having finished tying, turn the work and knit the next sc into the initial ring, while the resulting petal will twist a little. Then repeat from* 5 more times. Having finished the first row of petals, knit arches from 14 air loops, securing them with sts between the previous petals, and in the next row, tie the formed arches.

Sew on the flowers, decorating the core with a bead.

Flowers with separated petals.

Knitting is an interesting handicraft activity. A variety of original crochet crafts are used in the technique of decorating mobile phones, individual items of clothing, hats, household items and home interiors. Crocheted flowers are a durable and multifunctional gift, since the decoration is used as an element of outdoor decor at home. And a precisely selected color scheme of thread petals on a tablecloth and napkins will help to elegantly decorate a formal table relatively economically.

Crocheted flowers - a durable and multifunctional gift

You will need:

• Mercerized cotton yarn 100%;
• Hook 1.5 mm.

How to do:

1. We crochet one lifting air loop. We knit seven loops into the resulting ring using a single crochet braid.
2. Join the row by threading the first loop. We knit the resulting ring in stages in the same way further.
3. From the initial knitting point upward we knit three free loops with a pigtail.
4. We connect the top of the loops and the base of the flower with two columns of thread.
5. Knit the two loops back up and close the petal by pulling the thread through the column of the loop base.
6. We knit the connecting loop through the warp column by pulling the thread. The first flower petal is ready.
7. Then knit in the same way: three loops up, connecting columns with a cone, two down, a column and pulling the thread through the base.
8. Pull the thread of the last petal from the wrong side, pull the end of the thread through it, and tighten the knot. You've got a chamomile.

For decoration, it is best to carefully soak small parts with colorless glue or PVA.

Crochet flowers for beginners with patterns for free (video)

Small crochet flowers: description

To get started, you need to clearly understand which flowers you want to make from. Accordingly, choose the appropriate color scheme for the flowers, especially if they form a pattern. A thin wool thread will create a fluffy flower without clear contours, cotton threads highlight the boundaries of the figure, and mercerized cotton gives the product additional shine.

Knitting a peony

Necessary:

• Fine cotton yarn;
• Hook.

To get started, you need to have a clear idea of ​​what kind of flower you want to make.

How to do:

1. We form the initial ring - a base of eight braided loops. Connect them by knitting into the first starting thread.
2. Knit three air loops up, knit the fourth like this: from the second loop of the warp, pull the thread twice, hooking it with the top loop. It looks like an arch. Pull the thread from the arch into the third air.
3. Calculate an odd number of such double crochets along the first row, and knit each main loop in this way.
4. At the end of knitting, tighten the thread, making two air loops.
5. For the next row of flower petals per arch, increase the number of loops. Pull the thread through the base.
6. Make four loops up, pull the thread through the main yarn over, closing the circle of the petal.
7. Having finished the first row of petals, we pull the thread inside out and make the second row. The yarn overs in the bottom circle need to be made a little larger in size.
8. After finishing the flower weaving, pull the thread out, string the bead and return it to the wrong side. Secure with a knot.

We knit a convex flower like a simple button

You will need:

• Hook 2.0 mm;
• Mercerized cotton yarn.

Although the flower is knitted very simply, this does not prevent it from being beautiful.

How to do:

1. At the base of the thread, retreating 50 cm, we make a knot and thread a hook into it. We cast on three main loops, closing the circle by threading the fourth thread into the resulting ring.
2. Immediately knit another connecting chain loop.
3. We knit 8 stitches from it, close the ring back with a thread through the main circle without a crochet.
4. We start the next petal with one loop, pulling the thread through a single crochet from the base.
5. To make the flower appear fluffier, add two stitches in each of the remaining loops.

Finish knitting by pulling the thread to the wrong side.

Knitting a chamomile

You will need:

• Microfiber white, yellow;
• Hook 2.5 mm.

Chamomile can be tied quickly and easily

What to do:

1. We make the middle of the chamomile by knitting in the round: from the initial loop we knit three air loops, connecting them to the main one. Pulling the thread through the formed ring of loops, we knit the following ones.
2. From the last loop in the middle of the flower, change the color of the thread.
3. We start the first petal with twenty air loops. We close the circle by knitting the warp from the inside out.
4. We go back, stretching the thread through each air loop, forming the next row of petals.

Continue with this type of knitting until the desired volume of petals of the knitted decoration.

How to knit a flower decoration: step-by-step instructions for beginners

Necessary:

• Thin red wool thread;
• Green cotton thread;
• Hooks 3.0 mm and 2.0 mm.

This rose will perfectly decorate a hat or hairpin.

What to do:

1. Cast on a pair of stitches. We knit the base with single crochets.
2. Then two air ones for lifting and a connecting loop with a column.
3. At the beginning, stretch the thread five times, knitting a yarn over each time. Do this until the end of the chain.
4. Twist the resulting spiral into a rosette and stitch it at the base with regular thread.
5. We make a rose petal by knitting a chain of seven loops with green yarn.
6. Then two chain stitches, three double crochets through each loop, two chain crochets. Repeat the pattern until the end of the chain.
7. Use one thread to pass the connecting thread through the first loop of the beginning and the last loop of the end of the green leaf.
8. Sew a knitted rose with a leaf.
9. It is good to steam the product with an iron through gauze. To fix the stability of the decoration, coat it with colorless glue.

Attach the product to the hair clip by gluing the base to the surface.

Crochet petal: simple pattern

The simplest petal can be crocheted from air loops in stages, without touching the base.

Necessary:

• Cotton yarn;
• Hook 1.5 mm.

How to do:

1. Close five chain stitches into a ring. We pass through the first stitch, ten chain crochets from it, a thread through the middle arch, and close the petal with a stitch.
2. Back we make ten air loops, through the arch, connecting the post with the base.
3. Having knitted like this until the final loop of the base, make a second row - fourteen air stitches, securing them to the previous petal. Repeat the pattern until the end of the row.
4. Knit the hollow petal with the second loops, attaching them to the main ones.
5. If desired, you can tie each detail of the flower with multi-layer loops, visually creating volume.

It turns out to be a flower with holes inside. To decorate such petals, you can use beads and sequins, carefully sewing them into the middle.

Floral knitting has a unique and original style. This inexpensive decoration on a hat made of multi-colored thread brings a special flavor to the headdress. And a beautiful necklace of voluminous yarn petals falling to the bottom will certainly arouse the envy of those around you at a special event. A hand-knitted brooch will update your everyday dress.

Simple crochet flowers: master class on flat flowers (video)

A wide flight of imagination, a little patience and desire will provide you with fashionable things for many years. And you don’t have to spend a lot of money on it. In the modern world, where image dictates conditions, jewelry made with one’s own hands is more relevant than ever than mass production of tailoring similar models. These flower-shaped details can be used to decorate a child’s hat or scarf.

Knitting is a painstaking activity, but interesting and addictive. From threads of different qualities and colors alone, you can create beautiful items of clothing or small elements for decorating them. For example, you can crochet small flowers, which will then be useful in decorating children's things, women's handbags, hats and much more, the main thing is to choose a suitable pattern.

Simple flowers

The simplest petal flower crochet patterns are those in which the flower consists of a central circle and individual petals. These flowers are easy and quick to knit, and their size depends on the selected yarn thickness and hook size. In such flowers, the center is knitted using a chain of chain stitches and a series of double crochets.

All variants of such inflorescences have the same basis and, if desired, can become more complex and modified.

The petals make up the next row after the circular one. In it, the semicircular shape is achieved by making the outer parts of the petals with single crochets, and in the middle with single crochets:

So, you can start with a chain of six air loops and close it into a ring with a half single crochet. The knitting of the first petal will begin with it - two lifting air loops, then a double crochet, which rests on the ring. Then, two more chain stitches to go down and a half double crochet to finish the first petal. The remaining four petals are knitted according to the same pattern. The end of the working thread can be removed to the wrong side by pulling it through the ring.

Petals can be knitted either with support on each column of a circular row, or in one loop using several columns from a row with petals:

In some slightly more complex designs, the row of petals consists of arches of air loops, as shown in the diagram:

By slightly modifying the existing pattern, you can get a completely different flower: by adding teeth on the tops of the petals, their shape changes.

Multilayer products

After mastering simpler flower knitting techniques, you can begin to create more complex flowers. In nature, many flowers have several rows of petals; repeating such an inflorescence is not difficult. A voluminous flower can be made using the previous schemes of single-layer flowers, placing layers one on top of the other.

First, you need to knit a circle - the basis of the future flower - and knit an arch of petals for it, as shown in the first diagram. Knitting the second row, consisting only of petals, again begins from the central circle, exactly above the bottom layer. The second tier should be larger than the previous one by the height of one loop, that is, if three lifting air loops were made in the lower layer to create an arch, then four or five should be made on the next one. In this case, you should focus on the thickness of the thread, which determines the appearance of the knitting and the size of the pattern.

The third and all subsequent rows (no matter how many there are) in such a way that the new loops rest on the first row of loops of the previous row. That is, the “base” of the petal arch in one row is a continuation of the base of such an arch for the next row:

Yarn pansies

Asymmetrical flowers like pansies are no more difficult to knit than simple small flowers. The basis for them is the same - a circle made of a chain of air loops tied with double crochets. The difference is in the knitting of the petals.

Knitting pansies can be divided into three steps. The first of which is the round middle, for which yellow threads are taken. The air loops in the center are tied with connecting posts. Then, a narrow edging is knitted with a lilac or purple thread.

From the upper part of the flower core, two arches of air loops are knitted with purple thread. Next, the petals themselves, consisting of columns with several crochets, will be built onto these loops. In order for the petals to acquire a rounded shape, the outer columns are made with two crochets, and the central ones with three.

The upper part of the inflorescence has light lilac petals. To do this, you need to divide the central yellow circle into three equal sectors, each of which should begin with an arch of air loops. Then, according to the general scheme, petals of a suitable size are built onto these arches, where the outer columns will be shorter than the central ones.

Video on the topic of the article

You can use knitted flowers in any way you like. The advantage of such colors is that they are resistant to moisture - they can be washed, but they retain their shape. They can be easily attached to any material - with threads or glue. Small knitted flowers make beautiful hand-made jewelry, hairpins and decor for clothes, accessories and even complex postcards or photo frames.

Crochet and knitted items are at the peak of popularity right now. Crochet flowers for adult and children's clothing and hats look especially interesting. We invite you to try knitting beautiful bright flowers. Our master class is simple and clear, with step-by-step descriptions and diagrams. Crochet flowers for decoration can be crocheted from completely different threads: cotton, wool, synthetic, silk, mixed and darning. The main thing is that they are tightly twisted and do not fall apart into thin threads.

The most popular crocheted flower is, of course, the rose. Knitted roses are often used to decorate children's and adults' hats, cardigans, bags, headbands, and so on. We offer you the simplest master class, which is suitable for beginners in crocheting. The center of the rose can be decorated with a bead or button, which is very popular now.

To work you will need:

1. Threads of medium thickness.
2. Hook number 2.
3. Scissors.
4. The needle is big.

Cast on an even number of loops. For example, if you crochet xxx50 loops, the rose will be 7-7.5 cm in size. The number of loops determines what size rose you want to get. In our master class we cast on 26 loops, we will make a small rose. First row - knit sc (single crochet).

Second row: we knit 2 VP (chain loops) for lifting, in the 2nd loop we make RLS + 2 VP.

Third row: in the 1st loop of the second row we knit 5 dcs (dc).

Do the same in the next loop: knit 5 dcs.

In this way we knit the entire row to the end.

A spiral has formed, which needs to be twisted into a column and stitched with a needle so that it does not fall apart.

In order to make a leaf, you need to knit a chain of 8 loops.

Second row: 2 sc (single crochet), 3 dc, 2 sc.

We continue until the end.

At the end of the work we knit a picot.

These beautiful crocheted flowers are easy to knit in one evening. The combination of colors in this master class depends on your imagination, because pansies can be amazing colors.

We will knit according to this pattern:

Let's get started: make a sliding loop. We put 5 sc into it.

Next we knit like this: 1 RLS (lifting chain loop), 2 RLS in the RLS of the first row, 6 VP, 2 RLS in the second RLS of the previous row, 6 VP, 2 RLS in the third RLS of the previous row, 6 VP, 2 RLS in the fourth RLS of the previous row , 6 VP, 2 RLS in the fifth RLS of the previous row.

Under 6 VP we knit 1 SS (connecting stitch), 1SC, 1 PS (half-dc), 1DC (double crochet), 10 CC2H (double crochet), 1 DC, 1 DC, 1 PS, 1 SC. Under the next six VPs we knit 1 sc, 1 dc, 10 dc2n, 1 dc, 1 pc, 1 sc.

Under the third 6 VP we will knit 1 sc, 1 pc, 8 sc, 1 pc, 1 sc. Under the fourth 6 VP we knit 1 sc, 1 sc, 8 sc, 1 sc, 1 sc. Under the fifth 6 VP we knit 1 sc, 1 sc, 8 dc, 1 sc, 1 sc.

We tie two large petals on top with contrasting threads.

These cool flowers can be crocheted to decorate clothes, stripes on your head, and so on. This lotus will make an excellent decor. You can choose melange yarn with a small print; it will look very beautiful in this product.

This flower needs to be crocheted gradually, in several steps. First, three sheets are knitted. In order to knit a sheet, you need to cast a chain of 5 VPs and close it into a ring. Next, you need to tie the chain with sc (single crochets). Then knit the leaves according to the pattern.

Next, let's move on to the petals. Let's start the lower petals with a set of 10 VPs. We tie the loops with double crochets and look at the diagram. At the end you need to tie the leaves with sc, and then tie with concave sc, as in the diagram.

We knit the top flowers carefully, otherwise the product may warp and it will not be symmetrical. For the top flowers, you need to cast a chain of 8 VPs and tie them with double crochets (dc), as can be seen in the diagram. When all parts of the flower are ready, they must be sewn together with the same threads.