Kusudama. How to make kusudama “Lily” Make kusudama from paper diagrams

Kusudama- an origami technique that allows you to create beautiful 3D models of flowers by gluing different parts, rather than folding one into one as is used in most origami crafts. Today, we will learn how to make a flower using this method, and will also show you many options for various crafts that you can make if you know kusudama.

How to make a kusudama flower?

To create one color using this technology, we will use:

Five square sheets
. PVA glue
. paper clip

Let's get started creating right away!

1. Take a sheet of paper and place one end of it towards you.

2. We bend the bottom corner to the top corner so that we get a triangle with two equal sides.

3. The left and right corners should be bent towards the apex of the triangle. And we get a square again.

4. The sides bent towards the top need to be folded in half outwards, as shown in the photo.

5. The inner parts of the left and right bent parts need to be turned outward.

6. We turn our workpiece over.

7. As you can see, the left and right parts of the inverted triangles stick out a little, we need to remove them by wrapping them in the middle. First we bend the left side, then the right.

8. We turn the workpiece over again.

9. Fold the left and right corners towards the middle, exactly along the resulting line.

10. Apply glue to one bent side, from the outside.

11 . We connect the two extreme sides and secure them with a paper clip until the glue dries.

12. So we made one of five blanks for the flower. We also make 4 more blanks. We can alternate colors.

13. To make a flower from the five resulting blanks, smear the central seam with glue and connect them one after another.

14. To prevent our flower from falling apart before the glue has dried, it is better to secure the blanks with paper clips.

15. When the glue dries, we can remove the paper clips and see our result.

You can make a magic kusudama ball from paper or a banknote. A master class and 80 step-by-step photos representing each stage of the work will help you with this.

Paper kusudama ball: how to make for a beginner

Watch a master class for beginners that will allow you to master the basics of this interesting Japanese art. Here's what you'll need:

• paper;
• scissors;
• glue.

Cut off the excess from the paper to make a square. You can take small sheets of paper from a notebook for notes. Fold the sheet in half diagonally, then pull the two bottom corners towards the top to create a piece like this.

Now the bent corners need to be bent as follows: the right one to the right, and the left one to the left.

Next, the resulting two folds need to be straightened.

Turn the workpiece so that the reverse side is now facing you and turn the side triangles you just created outward.

Here's how we continue to create a kusudama ball from paper: turn the workpiece over again with the front side facing you and bend the corners, focusing on the existing lines.

Now you need to make a cone from this square part. To do this, apply a little glue to one bent triangle and connect it to another - on the opposite side.

Make several identical parts. The more there are, the more magnificent the ball will be. In this case, there are 5 of them.

You need to connect these blanks to give these petals the shape of a flower. To do this, lubricate their side edges with glue and connect them together.

To ensure that the workpieces dry in the correct position, use paper clips to secure the petals. When the glue dries, they will need to be removed.

For the kusudama ball, the master class on creating which you are viewing, you will need 12 similar flowers. When you glue them together, you will get a beautiful product, for example, like this.

When making kusudama balls, it is better not to use superglue or rubber, as the product may be damaged by traces of these solutions. It's better to take PVA.

Watch the following tutorial to make a kusudama ball.

This is how the product will turn out as a result. Before you start creating, take:

• rectangular paper blanks of 1 and 2 colors, 30 pieces each, measuring 5 by 10 cm;
• glue;
• artificial pearls.

Such kusudama for beginners should not cause them any difficulty, since creating a ball is easy to figure out. When finished it will have a diameter of 15 cm.

Take the first paper triangle and fold it in half. Direct the corners of this workpiece towards the center.

These manipulations are necessary in order to mark lines on the workpiece. Expand it and you will see them.

Fold the rectangle in half again, but along its long side.

Unfold the workpiece again, its right and left small sides will be drawn to the center. After which the rectangle must be brought back to its original position, but the following lines will clearly appear on it.

They are needed so that now, focusing on these bends, you can fold this workpiece along the lines. Here is its view from the front and back.

And here's how this element looks from above.

In the same way, you need to design a rectangle of a different color. Unfold it and place the piece you made earlier in the center.

Fold the corners of the second piece diagonally and pass them in a checkerboard pattern through the corners of the first piece.

You need to work a little more with these two elements so that you get a piece like the one in the next photo.

Now you need to assemble a kusudama ball from these modules. Let's take 3 blanks. The first has a kind of pocket. This is where you will place the corner of the second piece.

Next, thread the corner of the third into the corner of the second. You should end up with a pyramid like this.

This is how kusudama is created. Adhering to the presented diagram, you need to continue adding modules.

You will connect four pieces, and where to put the fifth is shown by an arrow and a small blue triangle on the right.

Now each pair of petals needs to be combined, creating a pyramid.

Give the petals the desired shape by fixing them with glue. Also, the fastening mass will help fix the pearls.

Prepare several similar modules, after which the kusudama ball can be hung to decorate the room.

Kusudama - money flower

This gift is a great gift for a birthday or any other occasion. If you want, then you can make a flower out of them. Depending on how much money you have, this will be the size of the bills.

If you just need to bring an inexpensive gift, then buy banknotes that resemble cash. These can be cut if you want to decorate your paper flower.

To make a kusudama ball out of money, take:

• real or souvenir banknotes;
• scissors.

Bend the ends of the money down, as shown in the following photo.

If this is souvenir money, then cut off these two corners, removing the middle.

If the bill is real, then you need to bend the corner inward to get a square. Fold it in half diagonally to make a triangle. Then we proceed in this way. We bend the corners of the workpiece upward. This is what you get.

Next, pull the right corner to the right, the left to the left. Lock in this position.

Fold 1 and 2 small protruding corners inward.

If the bill is a gift, smear the small side with glue, bend the opposite side to it and make a little bag like this. If the money is real, then you can fix the workpiece in this position using a transparent paper clip.

You will need 5 similar modules, which need to be connected to each other using glue or paper clips.

You will get such a beautiful flower from a banknote. If the money is a gift, then you have strips of trim left over, roll each one into an accordion shape and decorate your work.

Did you like the Japanese technology presented? Try making the following origami craft using the skill you learned.

How to make a paper ball with your own hands - master class

The diameter of the finished product is 12 cm. It consists of 12 flowers, and each such blank is made of 4 modules.

Cut a square with a side of 10 cm from a sheet of paper and fold it diagonally. Then again, along the second diagonal.

Turn the square over and fold it in half to create another strip. Then fold it in half so that this line is at a 90 degree angle to the first.

Based on these markings, make a double square, pulling the fold to the center.

One of the most pleasant chores is decorating the house for the New Year. In this business, you always want variety, to find and try something new. An excellent solution would be kusudama balls - “medicine ball”, literally translated. Kusudama is a creation of modular origami, the history of which goes deep into the past.

Once upon a time in Japan, collected flowers and plants, sometimes incense, were placed in such balls. A lot of time has passed and now these crafts are used as gifts or decorations. They are made from paper by folding modules and then connecting them.

To make a standard paper ball you will need:

• paper;
• scissors or knife;
• glue;
• threads

Although more modern masters are also inventing types of kusudama that do not require cutting or gluing, and threads are required exclusively for hanging. The simplest and most New Year's kusudama is “Icicles”. You can choose paper with glitter for it, then the finished product will shine and sparkle in the sunlight - just like real ice!

The option is a little more complicated - “Blooming icicles”. The beginning of the folding of the modules is exactly the same, but at the final stage in this version they are given greater openness. A very beautiful and lively decoration option! You can also choose a suitable pendant to match the colors of the paper and attach it to one of the ends - this will visually lengthen the ball and add new colors.

A more “twisted” model “Star of Talit”. Making such a kusudama is not as easy as the previous ones - it takes as many as fourteen steps to fold one part. But “Star” looks brighter and reveals a real master in its author.

If you like the idea of ​​making paper balls for the Christmas tree, but don’t have much time, “Karl’s Mandala” may be a way out of the situation. Unlike previous models, which require thirty components, “Mandala” is assembled from only eight. In addition, they are completely easy to fold and connect. The product looks more pointed, which gives it a certain charm.

Another option of thirty modules is “Little Roses”. If you choose warm-colored paper for them, you can end up with a very delicate and cute decoration. This “rose” will be an ideal decoration for New Year’s decoration in the apartment of a couple in love!

For those who like bright and stylish things, you can try making a “Small Island”. It will also require folding thirty blanks, but the result of the assembly will seem like a reflection of creativity, especially if you choose restless colors. A great option for young people.

Kusudama “Clover” will require some patience and perseverance when folding. However, the efforts will not be wasted - such a ball looks incredibly beautiful and technologically advanced.

The “Little Roses” mentioned above can be made more realistic, with curled corners. This variation looks more like a flowering plant. Its difference is in the blanks for the modules - at that time they were rectangles, but here squares are used. A good idea would be to make “Roses” in both techniques, and alternate them when hanging.

Looking at an apartment decorated for the holiday is nice, but it’s much nicer to know that the decorations were made by yourself. The art of origami - like any art - can give this joy. The Kusudama balls you make can be given to friends and family to convey to them a piece of your joy and holiday atmosphere!

In this master class we will show a diagram for assembling kusudama “Bombs”. This kusudama looks like a cartoon bomb, hence its name.

Assembling a kusudama is very simple, you only need to learn how to make one module, everything else remains a small matter. Bomb kusudama is a variation of super ball kusudama. The module of this figure is functional: it can easily be converted into a module for other types of kusudama. Having mastered the “Bomb”, you will avoid difficulties when collecting other balls.

We will need:

• multi-colored notes for notes
• ruler
• pencil
• thread
• needle

For kusudama we will need leaves of different sizes:

• 9 cm by 9 cm
• 7.5 cm by 7.5 cm
• 6.5 cm by 6.5 cm
• 5.5 cm by 5.5 cm

For the entire kusudama we need 100 modules:

• 20 blue modules from sheets 9 cm by 9 cm
• 20 red modules from sheets 9 cm by 9 cm
• 10 blue modules from sheets 7.5 cm by 7.5 cm
• 10 red modules from sheets 7.5 cm by 7.5 cm
• 10 blue modules from sheets 6.5 cm by 6.5 cm
• 10 red modules from sheets 6.5 cm by 6.5 cm
• 10 blue modules from sheets 5.5 cm by 5.5 cm
• 10 red modules from sheets 5.5 cm by 5.5 cm

Module Assembly

We will tell you how to make a module for this kusudama on a large sheet so that it can be seen better. There is one nuance in the module that you need to understand. Therefore, we also recommend making the first module on a large piece of paper. It is advisable that only one side of the sheet be colored, this way it will be better to see the folds and which side is the front and which is the back.

Fold our piece of paper in half diagonally.

Now you need to bend two opposite corners inward to form a “frog”.

Turn it over. Now we need to flatten the corners.

We do this with every corner.

We rotate our product so that the corners are one piece.

We bend the opposite corners to the fold in the center.

Also on the other side.

We turn the corners over so that we have a single corner again. We bend all the corners like this.

Bend the orange corners down.

We do this with every corner.

We have the core of the flower. This module is used to create flower kusudama; it is the core of the bud. But we continue to assemble a module for our kusudama. To do this, we need to carefully deploy our assembly.

We bend our leaf inside out (we don’t turn it over, we bend it).

So with every large angle. This shouldn't be a problem.

The most difficult part of this module remains - the last corner. It was because of this fold that we took a larger piece of paper with one colored side. Once you understand how to fold this fold on a large unit, you will be able to fold it in a smaller size with ease.

Don’t be afraid to stretch our paper a little; due to the fact that it is folded into a “pot”, nothing will happen to it. Therefore, with a little effort we bend the corners inward.

We also bend this corner inward.

That's all. Our kusudama will consist of such modules.

We will immediately prepare 100 pieces.

The base of the kusudama will consist of all the large modules.

Let's start stitching. To do this, it is better to take a large needle. We will also take the thread in several rows so that it is stronger and thicker, and also does not cut the paper. To do this, take a blue module and pierce it with a needle at the base of the module, leaving about 3 mm from the corner. We try to pierce the module exactly in the middle between the folds, so that during assembly it will stand straight and not bent.

We pull the thread through, leaving about 5-7 cm of a tail. In the future, we will use it to tie knots for strength.

We flash the red module in the same way.

You can combine the colors yourself. We alternate blue and red modules one at a time.

We sew together 10 modules (5 blue and 5 red). The result is an even circle. When choosing paper of other sizes, the modules may require more or less, since the diameter of our ball will change.

To prevent our modules from “running” along the rope, we tie a knot with our leading thread and the tail that we left at the beginning.

We tighten it as tightly as the paper allows us, so as not to tear it.

We also alternate them by color.

This row fits 6 more modules.

To add modules to the next row, you need to pass the thread through one module. We carefully lower the thread down between the blue and red modules. We go around the blue module at the base and thereby raise the thread to the top.

We add 2 more modules.

We pass the thread down in the same way. However, we no longer go around the module, but leave the thread on the other side. Let's now move on to the other part of our ball. But first we need to tighten the modules that we have already sewn.

We put on 8 more modules. Pull the thread and tie a knot to secure it.

We have 10 modules left (5 blue and 5 red). Carefully move the space between the modules to make the kusudama denser.

We add 4 more modules.

We move the thread again in the other direction.

We sew 3 more modules and transfer the thread again. Add the last 3 modules.

We bring the leading thread and tail side by side and tie a knot tightly.

Cut the thread 1 cm from the knot. You shouldn’t cut right under the knot so that it doesn’t come undone; it’s better to leave the tails, they won’t be visible under the modules.

We got Kusudama “Superball”.

Let's upgrade it to Kusudama "Bomb". To do this, we take the following modules in size.

Now we are trying to outline the modules into which we will insert them.

There is no clear diagram here; you can also insert additional modules, alternating through one. But we are not in a hurry to insert all the modules at once, since we will be gluing them.

Apply glue to the corner of the module. Do not smear it too much, as the paper will get wet and it will be difficult to place the module into the module.

We insert it into the blue module. But we insert it so that each corner fits into the corner. You can help yourself with an iron nail file to make it easier to direct the corners. Everything must be done extremely quickly, otherwise the paper will get wet from the glue and begin to tear. If the modules stick together, nothing can be fixed.

In this way we glue all the modules made from leaves measuring 7.5 cm by 7.5 cm.

We insert them into the modules that we just glued.

Last 20 modules left.

Here you can swap the colors and glue a blue module to the red ones, and a red one to the blue ones.

We add the last modules.

Our bomb is ready. You can already put it on the shelf like this. Or you can attach a loop to hang it somewhere.

Crochet a loop using a simple set of stitches.

You choose the size of the loop yourself, which one suits you best.

We pull the rope through and tie it into a knot. This way, the rope can be removed, but without additional effort it will not come off.

We got a “Bomb”

Some fans of the Japanese paper folding technique consider it incorrect to classify kusudama as origami, because glue or thread and a needle are often used during assembly. But, in essence, kusudama is assembled from identical modules folded using the origami technique. Therefore, let’s leave the showdown and move on to assembling the kusudas according to the diagrams.

The name "kusudama" is translated from Japanese as "medicine ball" It is assumed that they were originally made from fragrant fresh flowers and as incense lamps. Whether this is true or not, it doesn’t matter, because it has already been proven that contemplation of beauty has a beneficial effect on health. This means that they are truly medicinal, these mysterious balls are kusudama. Kusuda patterns exist as classic, whose authorship is lost over the centuries, and modern, futuristic.

You can fold kusudama from any sufficient thick paper. Paper that is too thin will not hold its shape, and the kusudama will float under its own weight. You can practice on regular office paper to work out the assembly diagrams. But to make the kusudama truly beautiful, it is better to use colored double-sided paper.

Flower kusudama: patterns

Since initially kusudama was a bouquet, most classic models are paper flowers. If you think this is difficult, try simple classic kusudama first. "Carnation", the diagram of which is given below. And you will see that kusudama is simple and fun!

Kusudama scheme "Astra" was developed by Yasuko Suyama, but has already become a classic. This model is easy to make and has clear, strict lines. The assembly involves 2 types of modules: 6 modules of the first type and 4 of the second.

True connoisseurs of flower kusudama create such exquisite balls that they can even be used like a bridal bouquet. Stylish and convenient, especially for a winter wedding: kusudama will not wither and is not afraid of frost. In any case, they are definitely indispensable for decorating a festive hall and will cost much less than bouquets of fresh flowers. Especially for special occasions we offer you Kusudama “Lily” pattern.

Kusudama assembly patterns often contain not only traditional folding, but also other techniques. For example, twisting makes kusudama charming and light. By the way, twisting is actually easier than it seems. Try following the diagram kusudama"Curler" This technique opens up wide opportunities for independent creativity and experimentation.

Ready-made kusudama can be decorated with beads, rhinestones and a tassel. Small paper balls can be used as Christmas decorations. Another toy suitable for the Christmas tree is based on the scheme of Paolo Baszetta.

Kusudama is a great way to while away cold winter evenings creating and contemplating beauty.