A detailed lesson on making flowers from threads. Flower brooch made of threads in Tenerife Video: weaving a flower from threads on a special machine

Even children can. This is a simple and easy-to-use device that does not require special sewing or knitting skills. And, as practice has shown, it is difficult to stop adults if they have tried to make at least one flower on such a machine. Almost immediately, ideas for gifts for friends, kindergarten teachers, and teachers arise.

Flowers can be woven from absolutely any materials: knitting yarn, satin ribbons, decorative braid, jute rope, packing tape, raffia, etc. It all depends on your idea and imagination.

Knitting lovers will especially like this device. The remaining balls of yarn will be used to decorate a knitted hat, handbag or sweater with an elegant flower woven on Flower Loom.

The yarn is used to make cute brooches. Especially if you take yarn with uneven spinning, as in ours. Fluffy yarn (angora, mohair) produces delicate flowers; when joined together, they turn into a magnificent fabric - a shawl, stole, vest or cardigan.

The leftover colored yarn will be used to make many different colors that can be used to decorate a wall panel or rug.

Flowers are a universal decoration for any gift or souvenir. And those made on this machine are simply a godsend for lovers of scrapbooking and decoration. Woven from various materials, they give a special charm to scrap works.

Flower Loom is practically a pocket-sized device that does not take up much space in your purse. You can take it with you anywhere, whether you have to while away the time while waiting for your child to return from the pool or you are going on vacation to warmer climes. In any case, it may come in handy - it will help you spend time usefully or create a beautiful decoration from local colorful materials.

How Flower Loom works

The machine consists of a collapsible base with holes and a set of pins according to the number of holes. The pins are tapered downwards and are easy to insert and remove. The set also includes a plastic needle to secure the petals and form the center. You can take any needle with a large eye.

The holes on the base are arranged in four different diameters, according to the size of which the flowers are made. Each diameter has 12 holes, numbered from 1 to 12. Each hole on the base is designated by its own number, and each circle (diameter) is designated by the Latin letters A, B, C and D.

What you need for work:

Needle with a large eye (included in the set)
Threads from which we will weave a flower (yarn, ribbons, etc.)
Scissors

How to make a flower on Flower Loom

1. Insert the pins into the holes in the base. Depending on how many tiers of flower petals you want, we fill that many diameters with pins. In the given master class there are three diameters: the largest is D, the medium is C and the smallest is A.

2. Take the yarn and fasten the end of the thread between the upper and lower parts at the number 1.

3. Turn the device so that 7 is at the bottom and 1 is at the top.

4. We begin to lead the thread from 1 down, bending around pins numbered 7 and 6 in the direction from right to left (clockwise), then bending around the top two pins 12 and 11 in the same direction.

5. We go down between 6 and 7, grabbing 6 and 5, then up, grabbing 11 and 10. We continue to wind the thread, grabbing two columns at the top and bottom, until the end of the row. If you need a more magnificent bottom row, you can make 2 or even three rows of petals with a diameter of D.

6. We make the next (average) diameter of the petals C, following the example of the first D. In our case, there are three rows of petals of this diameter.

7. Similarly, we make the smallest diameter A, making 2 rows of petals.

8. It remains to secure the middle, which will hold all our petals. To do this, cut off the working thread, leaving a tip of 30-40 cm. We insert it into a needle with a large eye and pass down our flower in its very middle. Now we “surface” with a needle near any of the columns of row A and again down in the middle of the flower. So we go around the entire circle near each column of row A. We secure the thread by passing it in a random order up and down the middle of the flower and cut off the tail.

9. Carefully remove the pins from the holes and admire your work!

The entire process of making a flower on a luma is shown in our video tutorial:

Each ribbon, thread or yarn behaves in a very special way. One material produces rigid petals that clearly hold their shape. From another - soft and tender.
Experiment with different materials and you will be surprised by the results!

Is there at least one woman in the world who is indifferent to flowers? But everyone knows that these fragile, charming creations of nature do not live very long - both cut and growing in the garden. They quickly wither and cease to bring joy to housewives.

What to do?

How can we extend the life of these little wonders of nature? There is, perhaps, only one way - to immortalize them by making elegant crafts - flowers from threads - with your own hands (for example, from yarn). they weave, embroider, knit, craft from wire and a variety of available materials. There are also thread flowers on cardboard. Making them with your own hands is not at all difficult.

Creating flowers from multi-colored threads is a creative and very exciting activity. The craftswoman will need a considerable amount of patience and perseverance. In addition, you need imagination, without which it is difficult to come up with something original. Of course, a good eye and dexterous flexible fingers are important.

Well, let's try to do this exciting thing - creating fantasy flowers from threads with your own hands.

What do we need

Any work requires the preliminary preparation of all necessary materials and auxiliary tools. In this case, we will need threads or yarn. We will choose it depending on the planned model, having decided on the type, color and size of future products. The color palette depends on this, which is best taken in the traditional range - for recognition.

Of course, you can make bright blue roses or black peonies. Perhaps it will be original. But in our case, I think that our handmade thread flowers should have maximum similarity to natural prototypes. For the same reasons, we pay attention to the texture of the threads. If the yarn is very complex, with an intricate structure, it will not be easy to work with, and the result will not always be predictable.

It is best to use threads of medium thickness, especially for needlewomen without experience. If you can’t find a suitable yarn, you can take a thinner one and fold it two or three times. On the contrary, the volume of threads that are too thick is reduced by delamination.

The easiest way to make flowers is from acrylic. This yarn has all the necessary properties - it is fluffy, slightly stretchy, and easy to wind on wire. However, threads of mixed composition are not prohibited.

Knitting needles, hook and wire

You can’t make it with your own hands without a hook and knitting needles. Let them be of different sizes. You will need to knit large flowers with thick knitting needles, and smaller ones with thin knitting needles. In our business we cannot do without wire of various thicknesses. Its large segments will form the frame of twigs and large petals, while the small diameter will be used to make weightless, airy leaves.

Before starting work, the wire must be washed clean to eliminate any possible oily deposits. This can be done by wiping it with a cotton swab soaked in alcohol or simply washing it with soap and water under the tap. This way our future craft will look neat and clean.

The wire may also vary in composition. For the stem of each flower, a strong steel one is suitable, which almost does not bend. It will also be able to imitate large branches. Thinner copper wire, which is easy to bend, will become the basis of leaves, petals and buds.

What else is needed

The tools you should take are scissors, wire cutters and, of course, pliers. Without them it is difficult to work with wire. You will need to bite off even pieces of it, press the protruding ends, or weave them together and secure them. Sharp, strong scissors will be needed to cut the threads - sometimes a whole bunch.

The needlewoman cannot do without additional materials - glue, foam rubber, cotton wool, cardboard, acrylic paints, which will have to be used to tint a piece of wire that was accidentally left blank during the process of winding the thread. With their help, you can also change the color of the yarn if you couldn’t find the right shade in the store.

Having prepared everything necessary (material, tools), let's think about the plan for creating our future product.

Preparatory work

How to make a flower from threads with your own hands? If you want to reproduce one or another of its types, examine the sample very carefully. Pay attention to the proportions. You may need to take a ruler and measure the comparative sizes of the petals and buds.

Then try to copy the floral elements, repeating the dimensions of a real living plant. The basis will be a wire contour, woven and attached to a living flower to adjust the size and shape.

If your future product has an intricate outline, it is first drawn on paper. All components are created separately, then applied to the sketch to adjust the dimensions - width and length. After which the disparate fragments are joined together.

Making leaves

Flower leaves of any size and shape are made in one of two ways. The technology of the first of them involves the use of threads, knitting needles and wire. Using these techniques, not only leaves are created, but also flower petals.

So let's get started. Loops of the required width are cast on the knitting needles from yarn selected by color and thickness. Then the collected row of loops is carefully transferred to the wire, a section of which should be bent in half and the ends of the threads secured. The wire and thread are twisted and the excess protruding ends are cut off. From such wire loops, giving them different shapes, you can get many leaves and petals.

Second way

Another method is winding. Thanks to it, we will be able to obtain leaves with a more complex shape. The work ahead is painstaking and requires a lot of patience. The basis of each petal is its own individual small frame. Having bent it from wire, it is wrapped with thread, then filled with yarn.

The edges of the leaf can be decorated by carefully stitching with another thread (contrasting or slightly different in shade from the main color). You can weave a thin cord from threads and sew it around the edges of the petal.

What do you need to know when making these leaves? The interwire space must be completely filled. Without this, our product will not look neat. When winding the thread, try not to allow any skips. The ends of each thread should be carefully hidden under the base.

How to make flowers from threads with your own hands: master class No. 1

As an example of making such a craft, we present a small master class on creating a specific flower - the tiger lily.

What should you stock up on? First of all, a small skein of wire (fairly thin) and a certain amount of thread. Take colors red, yellow and light green. Prepare a set of acrylic paints with a thin brush, a little cotton wool, a tube of PVA glue and red nail polish. Don't let the work ahead scare you. The process of creating this elegant flower is not nearly as complicated as it seems at first.

Making a tiger lily

Bend the thin wire in half. Future petals should have an elongated shape. If you don’t have a real flower at hand, find a corresponding photo on the Internet. Using the wrapping method, surround the top of the petal with red thread and the bottom with yellow thread. The transition between these two colors should be smoothed out - painted over with acrylic paint.

Decorate part of the yellow petal with small brown dots. One petal is ready. Repeat all of the above several more times, making 5-6 of the same petals.

Then we move on to making the stamens. Wet a small piece of cotton wool and twist it tightly. Wrap the middle of the resulting lump with thin wire, twisting the remaining ends of the required length together. If you have the opportunity to keep a living flower on hand as a sample, you can carefully measure the length of its stamens with a small ruler.

Cover the dried cotton wool with a couple of layers of glue, waiting for each of them to dry completely. In order for the manufactured stamens to take on a natural red color, they should either be painted with varnish (acrylic paint) or wrapped with a thin red thread. In total you will need to make six to seven pieces.

Continued work

The pestle is made in the same way - using the same cotton wool, glue and threads, this time green. Its shape and size will be suggested by the image of a real lily. Surround the pistil with stamens and secure everything together. For verisimilitude, lightly press down each of the stamens, then the resulting design is complemented by pre-made flower petals. Some of them are attached from the inside, some from the outside.

All remaining and protruding wire ends are wrapped with light green thread, and a thick piece of wire is attached to them, simulating a stem on which the winding continues. To make the work look neat, the threads should be fixed here and there on the wire with glue.

If your goal is to achieve complete verisimilitude, then you will need some more green leaves. They are made using one of the methods described above and attached simultaneously with the winding of the stem. If your tiger lily is part of a larger flower arrangement that includes many different flowers, you can do without the green leaves.

An easier option

But here’s a simpler master class for you - do you want to quickly make a cute bright yellow bouquet of fluffy flowers from yarn? To do this, you need very little - in addition to a skein of wool threads in a rich sunny color, take a long piece of thick wire or several metal skewers. Tools you will need are wire cutters and thread scissors.

Choose the optimal size for the length of each stem. It can be different - it will look more natural. Use wire cutters to cut the wire or skewers into pieces of the desired length.

Wrap the thread around your index and middle fingers, making about 30 turns. Leave the tip long enough. After removing the resulting skein from your fingers, tighten the thread in the center of the resulting small ball, dividing it into halves. All loops should be cut simultaneously with scissors.

What can we do?

Their size may vary, so you can take small scissors and cut each petal separately. Having fluffed the flower and given it a spherical shape, cut off the protruding ends of the threads. Then secure the resulting fluffy ball to a wire stem.

You can make such flowers from threads with your own hands in quantities of 11-15 pieces or more, depending on the volume of the vase in which you want to place your bright, elegant bouquet. The procedure for making a fluffy bright yellow “dandelion” is so simple that, having made one or two copies, you will automatically continue making it while looking at the TV.

Such a bright yellow bouquet will not only decorate the windowsill in the apartment, but will also pleasantly refresh the interior of the work office. You can also give it to friends as a fun gift.

Making flowers from threads with your own hands: another master class

Here's another wonderfully easy way. Even a child can make flowers made from thread and glue with his own hands. You will need balloons, multi-colored spools, scissors and the same tube of PVA.

All balloons are inflated and carefully tied so that they do not deflate during operation. The next step is to carefully wrap each of them with thread. To easily and freely unwind them from a spool or ball, put the threads in a jar with a wide neck.

We begin to wind the threads onto the balloons pre-coated with glue. As a result, we get several large multi-colored cocoons. After waiting for the glue to dry completely, remove the ball from the cocoon. To do this, carefully pierce it with a needle and pull it out through one of the cells.

Beauty, and that's all!

As a result, we have a weightless openwork product in the form of a ball made of multi-colored threads. Now this ball should be cut into two hemispheres, and each of them, in turn, should be processed with scissors, rounding the edges in the shape of flower petals. Thus, each of the balls will bring us two bright, wonderful, elegant flowers. Such DIY thread flowers for children can be an excellent decoration for a holiday room.

If you want your products to look even more elegant, you can decorate them with small rhinestones on top or sprinkle them with colored varnish.

Among the variety of devices and tools for needlework, there is a relatively recent invention that has already become a favorite of many avid knitters, and for good reason: with this very affordable set you can quickly and easily create interesting floral motifs. This set is called "Tenerife".

It is a base part on which attachments of different shapes and sizes are installed. The nozzles themselves have many pins: they serve to tension the threads of yarn in a certain way. Using different attachments, you can create voluminous flowers or even pompoms. This master class describes an example of creating a three-color flower - from it we made a cute brooch. You, of course, can use these flowers at your discretion: in creating hair decorations, for decorating knitted items. Often these motifs can be found as the central part of a knitted motif - a square or circle. There are actually a lot of options for using it!

To create flowers using the Tenerife technique you will need:

— a set of devices “Tenerife”;

- remnants of yarn of three colors;

- scissors;

— a base for a brooch (if necessary);

- black thread and thin needle;

- a straw for a drink (it will serve as a holder for a thread of yarn);

- bead (to decorate the middle of the flower);

- a needle for sewing knitted items.

Flowers using Tenerife technique: description of work

To make it easier to wind the thread around the pins of the nozzles, you will need a regular drinking straw. For the same purpose, you can use other cylindrical objects, for example, part of a ballpoint pen. It is important that the thread itself moves freely inside the tube.

At the end of the working thread you need to make a small knot: this will be the fastening for working on the side of the base of the device for weaving flowers.

On the base itself you need to install 3 nozzles of different diameters. A pin attachment is installed in the center, indicating the center of work. We pull the thread of yarn down along the left side, bend the thread around the lower pin of the largest diameter nozzle, return the thread to the upper pin, but along the right side.

We bend around the top pin, then lead the thread again along the left side to the middle; At the central pin, we turn the direction towards the pin on the largest nozzle, but we already bend the thread around the adjacent pin, and return upward to the pin next to the top one. So we knit the loops in a circle. We bend around the pins only those that coincide in direction with the pins of the nozzle of a smaller diameter.

We collect 3 rows of such loops.

Using red yarn, we make the second row of the future voluminous flower. The red loops are attached to the pins of the medium-diameter nozzle.

We also cast on 3 rows of such loops.

The last step is to cast on stitches using white yarn. You will need to cast on 3 rows of such loops.

Now you need to fasten all the rows of loops to each other, and to do this you need to decorate the middle by stitching all the rows with stitches through the middle of the flower. Using a needle for sewing knitted items, you need to carefully squeeze out the center pin. After this, carefully remove all the attachments from the base. Due to the tight tension of the loops, the structure will not fall apart and will hold its shape while work is being done on the design of the center of the flower.

The center needs to be shaped so that each stitch passes through the middle of the loop and the middle of the flower.

To decorate clothes, wreaths or other crafts, flowers are often used, which can be made from different materials: thread, fabric, etc. It turns out very unusual and beautiful if you combine flowers made using different technologies. In this article you will learn how to make a flower out of thread with your own hands, using not only floss, but also yarn and other types.

To make flowers from threads, you need to have a special loom, which you can buy in a store or make with your own hands from plywood or cardboard.

Master class: making a machine

You will need:

craft foam (plywood, thick cardboard);
compass;
pencil, pen and ruler;
hacksaw;
12 carnations.

Progress:

Using this template you can very quickly make simple and varied cardboard blanks.

Master class: DIY thread flowers

You will need:

threads of different colors;
loom;
needle with a wide eye;
buttons.

Progress:

We pass the end of the thread into the central hole of the machine and on the front side we begin to wind the threads onto the nails clockwise, starting with number 1, then moving to number 7, then to 2 and so on, as shown in the pictures.

For the splendor of the flower, you need to make 2-3 circles.
To finish the flower and secure it, take a needle and insert the end of the thread into the eye or use threads of a contrasting color. We begin to tighten and fasten the intertwined threads to the center from the petal, which is located opposite the one on which we finished winding.

Place the needle under the petal and pull it out from the other side. Then we put it under the petal again and pass through the loop formed by the thread and tighten the knot.

We pass the needle under the next petal, and then we pass it under it again and grab the neighboring one, located on the left. We continue to do this until we have secured all the petals.

You can use another method to secure the middle. We pass the needle from below under four petals, go back to three, and then again we pass the needle and thread under the next four and go back again to three. And so on until we sew around the entire circle.

If we are making a very simple flower, then we can stop there. Next, we secure the ends, hide them inside the center of the flower and straighten the petals.

Our DIY thread flower is ready!

You can continue to braid, going around in a circle several times, and then you get a more beautiful weave.

When I saw this device in a handicraft store, I couldn’t pass it by. The pictures on the box clearly demonstrated the method of making the flower and the possible results of the work. Of course, I became interested in this simple matter, bought a box with the device and tried it out that same evening.

Here's what I found when I opened the box:

Base plate;
- a plate for pins (with holes), which has letter and numerical markings: by placing the pins on one of the circles (A, B, C, D), you can make flowers of different diameters;
- pins (60 pieces);
- needle (plastic);
- instructions and operating diagram are placed directly on the packaging box.

To make the flowers, I chose a rich cherry color.

Operating procedure:

1. Place 12 plastic pins on circle D on the pin plate (resulting in a flower of maximum size).

2. Place the jig so that number 1 is at the top and number 7 is at the bottom. Pass the end of the working thread to the right side 1 and secure it between the pin plate and the base plate.

3. Pass the thread down, tying 7 on the right and 6 on the left. Then up, tying 12 on the right and 1 on the left, then 8 on the right and 7 on the left, 1 and 2. Continue counterclockwise, each time passing the thread around one pin that is still free and another that is already tied up.

The volume (splendor) of the flower depends on the number of circles completed.
I specially drew the manufacturing diagram with colored pencils so that each new turn would be noticeable.

4. To decorate the core of the flower, take a piece of thread about 1 meter long (in my case it is a yellow thread). Thread a thread through a plastic needle and pass it through the middle of all crossed threads in the direction from bottom to top. You need to pass the thread between the petals, one after the other.

5. Once the entire circle has been completed, remove the pins and tie the ends of the threads with a knot on the wrong side of the flower.

By placing the pins in another row, closer to the center of the circle, we get a smaller flower.

Compare the flowers in the photo - each subsequent one is smaller.

You can decorate a knitted item with such flowers, you can decorate a hairpin, a necklace, you can use flowers to decorate the interior - whatever your imagination suggests.

By combining a small flower with a larger one (sewn one onto the other), embroidering the core of the flower with beads, I got a rather voluminous brooch.

But that is not all! This is only the first option for making a flower. The device also offers other options.

To be continued…