Original mittens knitting patterns. Patterns for knitting mittens

Mittens have always been the most practical and comfortable for cold winters. Today there is a huge selection of mittens in stores for the whole family, but it is much more pleasant to wear things that were created with love with your own hands.

Having learned to knit, you can create entire sets: hat, scarf, mittens. They will harmonize beautifully with each other if they are made in the same style with the same pattern.

I propose to go directly to the discussion of the topic: “how to knit mittens with knitting needles - step-by-step instructions.”

How to knit mittens with knitting needles (step by step for beginners)

In order to learn how to knit beautiful stylish mittens, you need to learn how to knit the simplest ones, on the basis of which you can create the most original models for the whole family.

Seamless mittens - master class with detailed description (photo)

The most interesting thing is that even the lazy can handle this model. They can be plain, but the author suggests adding a few red stripes for variety.

For work we will need wool thread (70 g), 5 double needles No. 3.

The product is knitted from top to bottom on five needles, as a result of which it will turn out without a seam. Calculation of the number of loops: 20 x 1,7 = 34 loops. Distribute 34 stitches onto 4 knitting needles. I suggest rounding up and casting on 36 loops, so we get 9 each.

To make the explanation easier, let's give each knitting needle a serial number. Closing the circle, we knit four loops of the 1st knitting needle together with the end of the yarn remaining on the 4th knitting needle from the set of loops, so that the circle closes tightly around the edge.

The thumb will be knitted on the 1st needle, for the left - on the 2nd. To do this, knit the first loop on the 1st knitting needle with a thread of the main color. All other loops, except the last one, are knitted with colored thread. Then we return the loops connected with the colored thread to the 1st knitting needle and knit again with the main thread. We get a colored touch. This will be the hole for the thumb in the future. Next, we simply knit up to the little finger (about 8 cm).

Then we proceed to decreasing the loops on the toe of the mitten. On the 1st and 3rd knitting needles, at the beginning, we knit the first two loops together with the front one in the second way (at the back walls), having first turned over the 1st loop. On the 2nd and 4th knitting needles we knit two loops together at the end of the knitting needle using the first method (behind the front walls). So we decrease the loops through the circle until each knitting needle has half the number of loops (in our case, when the number of loops on each knitting needle is odd, we decrease the smaller part through the circle - 4 loops), then we decrease the loops in each circle (5 loops). At the same time, on the 1st and 3rd knitting needles, in those rows where we do not decrease the loops, we also turn the first loops over and knit them in the first way. When there are 2 loops on each knitting needle, tighten the loops and secure them on the wrong side.

Now let's get started thumb tying. To do this, carefully pull the colored thread out of the thumb hole. Then we insert two knitting needles into the free loops, we get 7 loops on the lower knitting needle, 6 on the upper knitting needle. We begin to knit the finger, distributing the loops on 4 knitting needles: 4 loops on the first, 3 on the second and pull one loop from the side edge of the hole, on the 3rd and the 4th knitting needle will also have 4 loops (3+1 from the side edge of the hole). To make it more convenient, the end of the working thread can be lowered into the hole (on the wrong side of the product).

We continue to knit the finger in a circle until the middle of the nail, and then begin to decrease the loops in the same way as when knitting the toe of the mitten: on the 1st and 3rd knitting needles at the beginning, on the 2nd and 4th knitting needles at the end, but decreasing We do it in every row. When there is 1 loop left on each knitting needle, we tighten the loops and fasten them on the wrong side.

Left mitten knitted similarly to the right one, but in a mirror image: we knit the hole for the finger on the 2nd knitting needle.

Step-by-step instructions for knitting on two needles

These long mittens can also be knitted on two knitting needles. You can knit two parts separately and then join the halves, but we will consider the option where you only have to make one invisible seam (this will be correct and visually more beautiful).

Needed: yarn, knitting needles, regular and knitting pins, measuring tape, hook, needle.

Let's start with the right part.

We measure the circumference of the wrist, the length of the palm and thumb. It is also necessary to measure the knitting density by knitting a little. We measure how many loops there are per 1 cm. My girth is 20 cm, there are 2 loops in 1 cm. You need 40p-4 = set of 36p + 2 edges.

We start from the bottom with a 2x2 elastic (knit 2, purl 2). It turned out to be approximately 10 cm (15 rows).

Next, we move on to the main fabric, where you can choose knitting needles of a smaller diameter. In the second row, add 4 stitches evenly. Next we simply knit 7 rows to the base of the thumb. You can try on and knit more or less if necessary.

The finger in the mitten is not on the side, but somewhat closer to the palm, so for the right mitten we knit as follows.

A. - edge, 2p. We knit according to the drawing and remove it with a regular sewing pin.
B. - For a finger, take 6-7 loops. Depending on completeness. We knit 7 loops according to the pattern, and remove all the remaining ones with a pin.
V. - we only have 7 thumb loops left on the working knitting needle.

We knit in height with the main pattern, without edges!!! We multiply the length of the finger by 2. My finger is 6 cm * 2 = 12 cm in height. 21 rows came out. WE KNIT THE FIRST AND LAST ACCORDING TO THE DRAWING!!! We return the loops from the large pin to the knitting needle.

Divide all the loops by 2. Slip one part onto a pin.

Let's start cutting down.

We knit the purl row according to the pattern. I don't have 20 stitches on my needle. I knit like this: edge, knit 1, knit 2 together, knit 12, knit 2 together, knit 1, purl 1. Total 20 stitches. We shorten this way in each front row until there are 6-8 loops left on the knitting needle. I have 7.

Close the loops and do the same procedure with the second half. To finish correctly, simply knit two stitches together, transferring the knitted one to the main needle.

From these lessons we can conclude that knitting is not that difficult. Knitting mittens requires basic knowledge and a little free time.

Knitted mittens with a pattern (diagrams and description)

Having learned to knit the simplest patterns, you can dilute them with beautiful patterns, giving free rein to your imagination. In the article “Knitting patterns and patterns (description)” you will find a large number of them.

And now I suggest switching to more complex mittens with knitting needles (diagrams and descriptions will help you understand this difficult task).

How to knit beautiful mittens with braids for women

Mittens with braids, knitting patterns and descriptions for lovers of the classics.

The braid will be the main decoration. We chose a simple braid, but if you are not afraid of difficulties, you can choose a more complex and original option.

Yarn - acrylic (can be made from angora), approximately 70 g; stocking needles No. 3.5.

Elastic pattern: K2, P2.

Knitting a braid pattern: 8 loops cross to the left (leave 4 loops on the auxiliary needle before work, knit 4 and knit loops from the auxiliary needle).

Cross 8 loops to the right (leave 4 loops on the auxiliary needle while working, knit 4 and knit loops from the auxiliary needle).

Cast on 48 stitches and distribute them onto stocking needles, resulting in 12 stitches on each needle. Knit with a 3.5 cm elastic pattern (if the elastic is not enough for you, knit more than cm).

Then, we start knitting the main pattern. For the convenience of knitting the “braid” pattern, I transfer the loops from the 1st and 2nd knitting needles to one knitting needle. Those. I have the loops distributed over 3 knitting needles (not 4 knitting needles), on the first knitting needle there are 24 loops of the main pattern, and on the 2nd and 3rd knitting needles from the palm side there are 12 loops each.

So, the first row after the elastic begins with a knitting needle with 24 loops, we begin to knit the main pattern.

Rows 1-6: K1, P2, K8, P2, K8, P2, K1, knit stitches on 2 knitting needles from the palm side.

7th row: K1, P2, 8 loops cross to the left, P2, 8 loops cross to the right, P2, K1, loops on 2 knitting needles from the palm side we knit. Repeat rows 1-7 throughout the entire work.

At a height of 10 cm from the beginning of knitting (you don’t have to have 10 cm, everyone’s hands and fingers are different), we form a hole for the thumb. Let's start with the left mitten. On the knitting needle from the side of the palm (3rd knitting needle) we knit 4 knits, remove 6 sts on a pin, put 6 sts on the knitting needle (so that there are 12 left, as before), k2.

We knit the hole for the thumb of the right mitten symmetrically, i.e. on the second knitting needle from the palm side: knit 2, knit 6, slip onto a pin, and knit 6, knit 4 on the knitting needle.

Formation of the toe carried out after the little finger on the hand is closed.

For a rounded toe, knit two middle stitches together on each needle.

Decrease stitches in each row until only 1 stitch remains on the needles (4 in total). After this, tear off the thread of the ball and thread it into the needle. Use a needle to pick up all 4 stitches, pull them off and fasten them from the inside of the mitten.

After the two mittens are knitted, we begin knitting the thumb. To do this, remove 6 sts from a pin onto a knitting needle, cast on 6 sts on a parallel row and cast on 4 sts on two side rows. In total, we got 20 stitches, distribute them onto 4 knitting needles (5 stitches per knitting needle).

And we knit circular rows of faces. to the required finger length. We form the toe of the finger similarly to the formation of the toe of the mitten.

Knitting mittens for children

Children really love it when their mother creates, for example, beautiful foxes or bears with her own hands, which they can put on their hands and go play in the snow.

Knitted children's mittens with owls

There is nothing more interesting for a child than mittens with a pattern. He wears such things with great pleasure, so I propose to please the child with wonderful owls.

Materials and tools:

1 skein;
stocking needles No. 1.5;
additional knitting needle or special stitch remover;
yarn needle;
four beads;
thread and needle for sewing on beads.
The mittens are knitted in two threads.

So, we cast on 32 loops, distribute them onto 4 knitting needles (8 on each).
Rows 1 - 10: knit 1 rib. x 1 purl.
11th row: faces.
Row 12: knit; add 2 persons from the broaches. on every spoke
13 - 18 rows: faces.
Row 19: we begin to knit the “owl” on 12 loops of the third and fourth knitting needles. The first knitting needle is knitting; second knitting needle - faces; third needle - knit 4, purl 6; fourth needle - purl 6, knit 4.
Row 20: same as row 19.

21 row: first knitting needle - knit.; second knitting needle - k2, slip 6 stitches onto a pin for the thumb hole, cast on 6 additional stitches, k2; third needle - k4, p2, k4; fourth needle - k4, p2, k4.

22, 23 rows: first knitting needle - knitting needle; second knitting needle - faces; third needle - k4, p2, k4; fourth needle - k4, p2, k4.

Row 24: first knitting needle - knit; second knitting needle - faces; third knitting needle - knit 4, purl 2, remove 2 loops for extra. knitting needle at work, knit the next two knit stitches, then knit stitches. spoke - persons; fourth knitting needle - remove two loops for extra. knitting needle before work, knit the next two knits., then loops on extra. knitting needles, knit 2, knit 4.

25 - 31 rows: first knitting needle - knit, second knitting needle - knit, third knitting needle - knit 4, purl 2, knit 4; fourth needle - k4, p2, k4.
Row 32: same as row 24

33 - 35 rows: first knitting needle - knitting needle; second knitting needle - faces; third needle - k4, p2, k4; fourth needle - k4, p2, k4.

36th row: same as 24th and 32nd.

Row 37: first knitting needle - knit; second knitting needle - faces; third knitting needle - k4, p2, k2, p2; fourth needle - p2, k2, p2, k4.

38 - 41 rows: first knitting needle - knitting needle; second knitting needle - faces; third needle - knit 4, purl 6; fourth needle - purl 6, knit 4.

Row 39: we begin to decrease. First knitting needle - knit the first 2 stitches together. behind the back wall; second knitting needle - knit the last 2 knit stitches. behind the front wall; third needle - knit the first 2 stitches together. behind the back wall; fourth knitting needle - knit the last 2 knit stitches. behind the front wall. Knit the remaining loops according to the pattern (knit and purl)

When there are only 8 loops left on the knitting needles, tighten them with a needle. For the thumb, transfer the 6 loops removed on the pin to the knitting needle, and cast on 2+6+2 loops from the edges onto three knitting needles.

We knit 12 rows in a circle. Then we transfer all the loops to two knitting needles and begin to decrease: on each knitting needle we knit the first 2 loops together behind the back wall, the last 2 - behind the front wall. We knit the second mitten in exactly the same way - only we leave the hole for the thumb not on the second knitting needle, but on the first.
Sew on bead eyes and enjoy this wonderful new product for winter.

Ideas with bullfinches (embroidery)

Having simple mittens on hand, you can decorate them with original embroidery, which will look great in a children's set.

Video lessons from the best masters

YouTube today has become a real treasure trove where you can find a huge number of educational videos. For example, on Svetlana Bersanova’s blogs you can watch a video lesson for free. And there are quite a few such good authors. You can find a mentor to your liking and receive valuable knowledge absolutely free.

Original mice or white hedgehogs for kids

How to knit mitts

Warm openwork for girls (double mohair)

Interesting two-color minions for a boy 7-8 years old

Jacquard products (video tutorials)

Jacquard with a winter theme is a classic that will always be relevant, so I suggest moving on to the most complex options that require maximum time and attention to detail.

Original knitting with ornaments (Norwegian patterns)

For girls with deer

If you want to learn how to knit a complex but very original “deer” pattern, this lesson with a detailed description will help you.

Men's mittens with arans for little men

If you learn all the lessons we offer, you will be able to fantasize and create products of any complexity: women's gloves without fingers, with a folding top, with a false pattern, from thick yarn and embroidery. Good luck in your endeavors. Try, experiment and pamper your family with pleasant fagots.

The times are coming back when self-knitted items had great value. Openwork knitted mittens will come in handy not only in winter, but also in early spring.

The description in the lesson is given for the seventh size of mittens. Abbreviations:

persons – face loops,
purl – purl.

To make one pair of openwork mittens you will need:

100 grams of thread (50g/125 m.);
knitting needles, set of five pieces, No. 3.5;
additional device for removing loops.

Left mitten

Cast on 48 stitches and distribute evenly (makes 12). Close the knitting in a circle. Make 35 rows with a 1 x 1, or 2 x 2 rib pattern. The rib can be knitted longer.

Having finished forming the cuff, proceed to the main part of the product. Work the loops on the 1st and 2nd knitting needles. satin stitch, and on the 3rd and 4th - with an openwork ornament.

Openwork pattern

Legend:

ᴏ – yarn over;
- purl P;
□ – persons. P;
/ – 2 stitches are knitted together with a slant to the right;
\ – 2 stitches together are performed with a tilt to the left.

The pattern is repeated until the product is the desired length. The result is a back side with a beautiful ornament.

At a height of 6-7 cm above the elastic band, a hole is formed where the thumb will be. It is located on the third spoke. Make 3 knit stitches, then slip 7 stitches and set aside for now. For further work, cast on a new 7 units, and knit the remaining 2 loops. Knit using this technique until the end of the row.

After the required hole is left behind, work continues: 1 and 2 knitting needles - with a pattern according to the diagram, 3 and 4 - with stockinette stitch. When the desired length of the product is reached, begin making a neat toe.

The first three circles remain unchanged. Then make a decrease along the knitting needles:

On the first: 1 persons. with a slant to the left, 2 together with a slant to the left, make the others with an openwork ornament.
On the second: loops are knitted according to the pattern until 3 pieces remain, then 2 are worked together, knit 1.
The third is knitted like the first, and the fourth like the second.

The decrease is carried out until you get 2 units on the knitting needles. The remaining 8 loops are pulled together with thread and secured from the inside out.

Right mitten

Its knitting occurs in a mirror image of the previous one. The difference is that the pattern will be located on the 3rd and 4th knitting needles, and the finger hole will be on the second from the palm side. To do this, two loops are knitted, 7 are removed on an auxiliary pin, and 7 are cast on a working knitting needle, the remaining 3 are made in stockinette stitch.

Thumb

Put the set aside 7 units into work, cast on 3 loops on each side and 7 on the opposite side. Then divide them into 4 knitting needles as in the photo (5 for each).

Knitting openwork mittens is done in circles. 5 cm before the end of needlework, begin to decrease the loops of the toe. To do this, two knitting needles are first knitted together once. Decrease is carried out in each subsequent row until 2 loops remain on any knitting needle.

Pull a thread through them and fasten it on the wrong side.

In conclusion, it is worth noting that you can use patterns on mittens at your own discretion. The repeat of the openwork should occupy no more than half of the cast-on loops.

Video: Openwork mittens knitted

A simple example of a model with braids and lace. Detailed description in video tutorials from experienced needlewomen.

Openwork mittens knitted with patterns

Mittens are an indispensable attribute of winter clothing. Nowadays handmade knitted products are very fashionable, so their prices are not low. Do-it-yourself knitted mittens will not only add something interesting to your evening, but will also help you save an extra penny.

Knitting mittens for beginners, step by step

Let's try to knit mittens on five knitting needles. Four of them will hold the canvas, and the fifth will be working. Before you start knitting, you need to determine your size and how many stitches you will need.

To do this, you will have to make a sample, from which we will calculate the exact number of loops and the length of the mittens. You can't knit by eye. Measure the length of your fingers, wrist and hands. Based on the obtained measurements, bind the sample.

Next you should count how many loops there are per centimeter. We do this using a ruler. We multiply the number of loops obtained by the length of the arm from wrist to hand. As a result, you should have a number that is a multiple of four. If it is different, take the smaller integer that is divisible by 4. For example, it turned out to be 47, it’s not divisible by 4, let’s take 44. All that remains is to build a diagram based on the measurements taken and get to work.

For knitting you will need a set of five knitting needles and yarn. It is better to take wool, it is warm and soft. When purchasing yarn, be sure to pay attention to what needle size is written on it. If you take the wrong knitting needles, the loops will either constantly fly off, or you will find it very difficult to hook them. If you have everything ready, then you can start.

We start knitting with cuffs. Mostly the cuffs are knitted with an elastic band. We alternate 1x1 purl and knit stitches, or 2x2.

We cast on loops, let's say 44 as in our example. To prevent the edge of the cuff from pressing, you need to pick it up as loosely as possible; to do this, you can take a knitting needle one size larger and fold the thread in half. A few examples of how to cast on stitches on knitting needles:

So, we connect two knitting needles together and cast on loops. Slowly and carefully pull out one knitting needle and knit the first row of elastic as tightly as possible. At the same time, distribute the loops onto four knitting needles. In our case, 11 on each.

After the loops are distributed and the first row is knitted, we close the knitting. Simply join the cast-on and warp threads together. Next we will knit the cuff with an elastic band simply in a circle for a length of approximately 6-8 cm, and to the base of the thumb with regular garter stitch; for beginners this is the easiest option. But if you want, you can create a pattern in the form of a braid on the back of your palm.

Let's say you have finished 7 cm of elastic and proceed to the main fabric. Select eight loops in the place where the pattern will be. You can do this using special knitting markers. We will knit these 8 loops as follows: purl 2, knit 6, purl 2. We knit five rows in this way. Next: purl 2, knit 3. remove with a pin (fasten the pin), k3. We remove the loops from the pin onto the left knitting needle and knit three stitches. Next, we knit five rows again according to the previous pattern. On the sixth we use the pin again. And we do this every five rows. You will get a pattern<<коса>>.

Now we knit the finger and finish knitting.

We apply the canvas to the left hand. For the thumb, make four knit stitches on the fourth needle. Remove the loops that go further with a pin, replace them with air ones and continue knitting to the top of the little finger. Then start decreasing evenly on each side, placing the fabric against the pattern to check.

Approaching the top of the middle finger, you need to knit the remaining two loops together and pull the end of the thread to the wrong side. Cut off everything unnecessary.

The thumb remains. Cast on loops around the remaining portion of the fabric. Divide them into four knitting needles and knit to the middle of the nail. There, begin a uniform decrease. When two loops remain, knit them and hide the end of the thread on the wrong side. You can decorate the mittens as desired.

Lessons on knitting mittens, master class

If you succeeded with five knitting needles and you have mastered the basics of knitting mittens, let's knit something more complicated. These are such beautiful mittens made of 100% alpaca wool 167m/50g.

You will need two skeins of yarn. And also stocking needles No. 3 plus another auxiliary needle, and a hook.

We will knit with double thread. We distribute 12 loops on the knitting needles. We have 48 of them in total.

Now we will knit the pattern.

Let's return everything back:

We knit with the main thread using face loops:

We continue to knit. This is what three patterns look like:

We continue knitting until the fingers are visible, as in the photo:

Let's start working on the thumb. Remove the conditional thread of a different color and put the loops on the knitting needles, four on each:

The second mitten is knitted similarly.

Sizes for knitting mittens

Measure the circumference of your palm and compare it with the table.

Mittens knitting table

Without exact numbers and calculations you can’t even knit a mitten. Mittens do not require much yarn, no more than one hundred grams for adults and about sixty for children. Yarn consumption increases patterns. If you want to add a braid pattern, for example, then you should buy 25% more yarn.

The first table is for yarn 200m/50g. Knitting needles approximately 2.5.

The second table is for yarn 125m/50g. Knitting needles approximately 3-3.5.

Indian knitting mittens

Indian mitten knitting involves knitting the thumb<<индийским клином>>. These mittens fit very comfortably on the hand, and they are very easy to knit. In this design, they begin to knit the thumb from the elastic band. We’ll look at how to do this below, but here are several options for knitting mittens using an Indian wedge:

Knitting mittens with an Indian wedge

We will knit men's mittens. Yarn Lana gold 800m/100g and angora 500m/100g. In general, they start knitting the wedge immediately after the cuff, but we will first knit several rows and only then start making the wedge.

To create a wedge, you need to add on the left mitten between the fifth and sixth loops, on the right between 18 and 19.

Patterns for knitting mittens, diagrams with descriptions

Knitting pattern for children's mittens

Knitting Thumb Mittens

This method is convenient to use if you knit a pattern on both sides.

To knit the thumb, transfer the loops onto two knitting needles of four. From the opposite edge we cast on eight stitches and also divide them into two knitting needles of four. We continue knitting the finger in a circle. We reach the middle of the nail and begin a uniform decrease. We knit the last loops together and hide the thread.

Another way is to knit the thumb on two needles.

Knitting the thumb of mittens with a wedge

This type of knitting is called both the raglan finger and the anatomical thumb. Tie the elastic band as you need, then proceed as described.

On the third knitting needle we cast on nine chain stitches and knit the remaining ones. Next, follow the pattern and knit the mittens to the top. At the same time, do not forget to decrease two loops on the third knitting needle so that the wedge goes away. To knit a finger, transfer the loops to the knitting needles. We knit an additional nine loops from broaches and spread them over two knitting needles. We knit the finger in a circle.

Knitting mittens with braids

Interesting mittens with convex braids. But before you start doing the work, try knitting the pattern itself separately. This will make it easier for you to understand what knitting density is required for your yarn and how many loops you need.

Cast on 52 stitches on double needles. Distribute them 13 each. The elastic band will be 2 by 2, in forty rows.

Jacquard knitting mittens

You will need approximately 100 grams of yarn. Knitting needle size 2-2.5. As always, start by calculating your knitting density and stitches. Tie the cuff. After this, you can start knitting the pattern. One loop is one cell in the diagram. Work with the pattern carefully, do not tighten the threads too tightly, but also make sure that the thread does not sag from the wrong side.

We knit the mitten with a pattern up to the thumb. Where you remove seven or eight stitches, pick up the same number of stitches and continue the pattern to the top. Finish the top in a way that suits you best.

We also knit the thumb as you feel comfortable.

To knit such mittens you will need twice as much yarn. Work on a double mitten also begins with determining the size and calculation of the loops. When you have everything calculated and ready, you can start knitting.

Let's say we need 48 loops. Divide them into four knitting needles of 12. Knit twenty rows of elastic. We knit the next fifteen lines only for faces. We designate the thumb. To do this, knit four loops on the first knitting needle, and remove the next 8 with a pin. Then we again cast on eight stitches on the first knitting needle and continue knitting the mitten until it is completed. We knit the thumb.

Then we return again to the beginning of the mitten, the first row of elastic. We dial 48 stitches there again and knit 40 rows with an elastic band. Next, we knit the mitten according to the pattern we went through.

Knitting men's mittens

The principle of knitting men's mittens is not very different from knitting classic ones. The only difference is the size. Above we have already provided a table of sizes that you can use as a guide.

Knitting mittens on two knitting needles

You can knit prefabricated mittens on two knitting needles, that is, you will need to sew the parts together, or you can do it without tearing off the threads. Let's try to connect the second option. You will need two knitting needles and optional yarn. The size of the knitting needles should correspond to the thickness of the yarn.

Cast on 24 stitches and knit three to four rows in regular scarf stitch. Next we knit the cuffs with an elastic band 1 by 1. After you knit the cuffs, continue working with knit stitches to the tip of the little finger. Then you need to make an even decrease until you have ten loops left in the middle.

We knit at the height of the thumb, and then we go back in the same way as with the mitten itself. After the finger is ready, we finish the canvas. We tie the face to the elastic band. and knit an elastic band 1 by 1.

The mittens are ready. Don’t forget to try on the product as you work so you don’t have to re-bandage it.

A good way to become the owner of unique mittens is to knit them yourself. It is more convenient to crochet a small-format circular item, but there are many ways to get by with knitting needles - five or two. Beginners should study different techniques in theory and choose the one that is easiest to understand and implement in practice. Simple mittens are easy to knit, but they are unlikely to become original unless they are additionally decorated with embroidery or appliqué, including 3D ones. Even if you are not confident in your knitting skills, you can achieve an interesting result if you apply maximum imagination to your mittens.

Where to start knitting mittens

To knit a product, you must first have a good idea of it. Not abstract mittens, but the kind you would like to wear or give to a relative or friend. You need to decide on the color of the mittens, their thickness (for severe frosts, for light winters, for the demi-season period), and their purpose (for sports, going out, for everyday wear). Women's and men's mittens can be decorated with a pattern, but in the first version it can be delicate or elaborate, and in the second it can be more strict and laconic.

Children's mittens should be made from safe materials, but at the same time very durable. Little naughty kids put their mittens under constant stress: they either build a snowman, or slide down a hill, sliding on the ice or running their palms along the wooden side. And as the children grow up, skiing and skating, building snow forts, etc. will become their usual hobbies. This is an even greater burden on the mittens. That is why it is recommended not only to tie them, but also to provide the inner side, which falls on the palm, with waterproof and low-abrasion material.

Yarn selection

Very thick threads, as well as knitting needles, are not suitable for small accessories. The finer the texture, the more interesting the designs can be on the mittens. It is most convenient to knit with knitting needles 3 mm or thinner. The yarn should not exceed the thickness of the diameter of the knitting needles.

For cold weather, it is good to knit down mittens, but it is better to add synthetic thread to pure down yarn for strength. You can also use mohair with the addition of synthetics. Colored acrylic yarn is great for demi-season mittens. It is good for making mittens - mittens without fingers. This accessory is indispensable for those who have to spend a lot of time driving.

Selection of scheme and pattern

Here everything completely depends on your imagination. Some people prefer jacquard patterns, traditional for factory-made mittens. Some people prefer to knit plain mittens with knitting needles and then decorate them with crocheted details. Some people prefer embroidery on the finished product. But even for such a small thing, you can choose a textured ornament, made immediately with knitting needles. Experienced craftswomen can make “bumps” and “aranas” on mittens. Openwork patterns only make sense for mittens or double-layer mittens.

Beginner knitters should choose the simplest pattern or stocking stitch in order to master the techniques of creating mittens with knitting needles. You can decorate the mittens later - with embroidery, beads, beads, sequins. If you want to do everything at once, then you should choose thread with lurex for the mittens.

Knitting mittens - instructions for beginners

In simple terms, the mitten consists of two “chambers”: the smaller one for the thumb, the larger one for the palm. People who are inexperienced in knitting should study in detail how to knit the transition from one “chamber” to another so that the mitten turns out to be solid. When performed on two knitting needles, you get one beginning - an elastic band - and two ends: one on the finger, the second on the main part. We will return to the elastic band later, but now we will look at how the main part of the mitten is knitted with five knitting needles. To make a beautiful transition from the elastic to this part, you can add one loop in the middle of each of the four knitting needles. To prevent a hole from forming, an additional loop should be made not by yarn over, but by knitting it from the broach between the loops. Next, the mitten is knitted in the round to the point where you need to move to the thumb.

Here you should knit a thread of a different color without fastening it, since you will have to take it out later. From the first knitting needle we knit one loop with the main thread, then replace it with a thread of an alternative shade, and knit all the loops from the knitting needle to the last one. Then remove loops of a different color one by one from the working needle and string them onto the 1st needle. We knit these loops again with the main thread, then we knit the last loop that remained on the first knitting needle, and continue knitting on the remaining three knitting needles. The base for the thumb is ready.

We continue knitting mittens with knitting needles until the end of the little finger. For some people, the little finger is much shorter than the other fingers. Then you can knit a few more rows - up to the nail holes on the ring or index finger (depending on which one is located lower on the raised palm). From this point you can move on to gradually closing the loops - forming the toe.

Decrements are made at the beginning of needles 1 and 3, as well as at the end of needles 2 and 4. On knitting needles 1 and 3, the first loop is removed from the front wall, the second loop is knitted and pulled through the first. On needles 2 and 4, the penultimate stitch is knitted and returned to the non-working needle. Using a working knitting needle, we pull this loop into the last loop that remains unknitted. So we close until the moment when there are a couple of loops left on the knitting needles. They can be pulled through each other one after the other, and the cut thread can be pulled into the last loop and tightened. Hide the thread in the knitting.

How to tie a thumb

It's time to return to the colored thread - the thread for the thumb. It needs to be carefully pulled out, and the loops on both sides caught on two knitting needles. You need to pick up a pair of loops from the side walls of the hole using the remaining two knitting needles. Distribute the stitches on four needles evenly and knit the thumb in a circle. You can close it with the same “wedge” as the main part of the mitten.

How to knit an elastic band

It’s easy to knit a beautiful elastic band for a mitten. You need to cast on two knitting needles the required number of loops, a multiple of four. Next, the loops are distributed equally onto four needles. The knitting needle where the tail of the thread ended up is called the first; The rows are counted from it. We begin to knit a 1 x 1 elastic band. As soon as we reach the second row, we knit as the loops “look”. We knit the front loops on the front wall, and the purl loops on the back wall. Then we will get the same beautiful elastic band as when knitting in rotary rows. In order for the elastic to fit well around the wrist, it must have a sufficient height - 4-5 cm.

Mittens with 2 knitting needles

Using two knitting needles you can knit a mitten with a seam. It is knitted in the form of a sweep, and then its parts are connected. Knitting begins with taking measurements. Next, cast on the required number of loops for the elastic, a multiple of 2, plus two edge loops. The elastic is knitted according to the 1 x 1 pattern of the desired height (4–5 cm). Let's move on to the main part of the mitten. If it is necessary to make an extension, then add loops evenly, knitting them with a knitting needle from the broach between the two loops of the previous row.

When we reach the beginning of the thumb, we knit a couple of loops, then remove the number of loops required for the finger onto additional knitting needles (a pair of flexible knitting needles) of the same diameter. You can calculate the number of loops as half the circumference of your thumb plus a small margin to make it easier to put on and take off the mitten. Next, we knit only these loops with additional knitting needles until the end of the thumb. We check the size and continue knitting so that the resulting strip freely goes around the thumb in length.

Now we return to the main knitting needles and put the loops from the end of the strip onto the working knitting needle. We knit to the end of the row, turn the knitting and continue to knit all the loops, including the “finger” ones and those that remained knitted before the finger was formed. We reach the end of the mitten and divide the loops in half. Again we will use additional knitting needles, where we will remove half the loops. We knit the remaining part with decreases on both sides. When a third of the total number of loops remains on the knitting needles, you can simply close them off. We take additional knitting needles and knit the same thing on them. We sew the side parts of the thumb on the wrong side, and then the entire mitten. We use a knitted seam.

How to finish a mitten

Knitted mittens often end with a wedge, but not everyone likes this pointed edge. You can round the mittens a little, giving them a more feminine silhouette. The faster the loops decrease, the more obtuse the angle is at the end of the mitten. If we work with five knitting needles, then on each of the four “well” knitting needles we need to make two decreases - in the middle and at the end, knitting two stitches together. So you need to reduce the number of loops row by row until there are 4 or 8 loops left. They can be combined by knitting into each other or tied with thread. The toe will be flat and neat.

Knitting mitts with knitting needles - diagrams with descriptions

It’s even easier to knit mittens with knitting needles: you won’t need any decreases at the end of the mittens or the wisdom of doing the thumb. Sometimes the mitts contain a wedge into which the thumb comes out, sometimes there is just a hole. The most closed version of the accessory has a thumb tube topped with an elastic band. A similar elastic band is made along the edge of the wide part of the product. The simplest version of openwork mittens can be tied with a finger hole.

The peculiarity of openwork mittens is that they are well ventilated, it will not be too hot in them, and besides, such an accessory is perfect for a cardigan knitted with a similar pattern. The ornament should be placed on the outer side of the palm, the inner side can be knitted with a smooth fabric from facial loops or also made into an openwork pattern. First, you should knit the sample with the same knitting needles that you take for work, measure it and calculate how many loops you need to cast on in a circle for the palm part. To do this, the circumference of the palm is first measured.

You need to start knitting with an elastic band. Its size depends on the circumference of the wrist. You can also knit a separate elastic band and measure how many loops fit around your wrist. When knitting with five knitting needles, do not forget that you need to make sure that instead of elastic, you don’t get “millet”. If we see a front loop, then we must also knit a similar one above it.

Having knitted 4–5 cm with an elastic band, we move on to the main ornament of the open mitten. If an extension is needed on this part, then add a loop, knitting it from the jumper between the loops of the previous row. If you need to decrease the loops, then simply knit two loops at an equal distance from each other. While the openwork pattern is worked in the round, odd rows are knitted according to the pattern, even rows are knitted. But as soon as we approach the thumb hole, we have to switch to turning rows, although knitting continues with five knitting needles. And then even rows need to be knitted exclusively with purl stitches. As soon as the edges of the hole need to be closed, you will have to switch back to circular knitting, therefore, even rows need to be made with facial loops. You can finish knitting with an elastic band 1–2 cm long, and then close the loops.

Making thick mittens with a pattern is somewhat easier than knitting mittens. The difficulty may be the wedge for the thumb. If we have an ornament on the outer part of the mitts, then along the inner side and the wedge we should make a smooth fabric in stocking stitch. The beginning of the wedge is located not far from the elastic - after a couple of rows. The basis for the wedge is the second loop on the first needle. To make it symmetrical, you need to yarn over on both sides of this loop or knit a new loop from the jumper. The second option is preferable, because this way you won’t get holes in the knitting. Increases must be made through the row. Then try on the product to see if it has reached the base of the thumb. We knit a couple more rows and remove the wedge loops onto an additional knitting needle or pin. We close the remaining loops in a circle and knit to the base of the remaining fingers. Close the loops and transfer the knitting needles to the wedge. From the side loops of the hole we cast on half as many loops as we have left on the pin. Next, knit a small elastic band in the round with knitting needles and bind off the loops.

For the little ones, it’s also easy to knit mittens with knitting needles. The product turns out to be so miniature that the minimum amount of time will be spent on it. But you can give free rein to your imagination by designing the mittens to look like cartoon or fairy-tale characters. You can also come up with a lot of different decorations. There is no difficulty in knitting small things; you just need to take a tool with a smaller diameter if you want to make a pattern on the mittens.

What patterns should I choose to knit mittens for a girl? Delicate, floral, airy. The main thing is not to forget that mittens are needed for warmth, and that the child should be comfortable in them. There are several options for how to decorate mittens made with knitting needles. It's easy to knit mittens with an owl. The night bird will have to make eyes from two small beads. For infants, it is worth making mittens with knitting needles without knitting the thumb separately. It’s better for kids when the whole hand is in one “container”, because it’s warmer for all the fingers. It’s good to make such mittens with ears and embroider a kitten’s face. This item of children's clothing is often called “scratch mittens,” but not because it can scratch, but because a child wearing such mittens cannot accidentally scratch his face.

Older children can knit mittens with knitting needles equipped with a thumb. To the delight of the baby, it is worth making an image of cat pads on the inside of the mittens. They can be knitted directly with knitting needles or crocheted separately and sewn on as an applique.

Knitted mittens - with hares, foxes, bears and bullfinches - are equally good for boys and girls. Only the color scheme will differ.

For a child, you can knit mittens using knitting needles using the same pattern as for an adult. We have already learned how to make an elastic band and the transition to the thumb. All that remains is to figure out how to make an interesting pattern using only knitting needles. First, let's audit the remaining yarn and evaluate what shades are available. Let's select an interesting picture in the desired color scheme. For example, leftover blue, red, black and brown yarn will allow you to make a bullfinch on a branch. If there are several shades of green and brown, you can make mittens with a tree.

It’s good if you have a picture that is pre-divided into squares for knitting. But if this is a cross stitch pattern, then it will have to be slightly transformed. Knitted fabric stretches in width. The drawing will also stretch out. Therefore, you need to knit a test sample of garter stitch 10 x 10 stitches with the selected yarn and knitting needles that you intend to use. Next, we measure how many centimeters in length and width we have in our sample, make up the proportion and re-divide the drawing into squares with the correction.

Knitting "Cat" pattern

You need to start knitting mittens with knitting needles from the main tone, making an elastic band for them. Next, we move on to garter stitch and introduce threads of other colors. It is advisable not to tear them off each time and tie them with a thread of the main or another color, but to lay them down while working. To prevent the threads from interfering in the future, they should be hidden in the knitting or sewn from the inside out into interlining in place of the pattern. This way, the child’s fingers will not get tangled in the stretched strings.

Mittens knitted - beautiful knitting

The textured knitting on the mittens is no less interesting. If you have learned how to use knitting needles and a knitted pin well, then it will be easy for you to make “braids”, “ropes”, “tulips” and other ornaments with overlapping loops - “aranas”. It’s better to watch a video on how to do this rather than explain it in text format.

An interesting idea is to knit mittens for lovers. At the stage of a romantic relationship, it is so nice to walk down the street holding the hand of your loved one. But when both hands are in mittens, it is difficult to feel each other's warmth. Therefore, the set for lovers contains only three mittens: two regular and one double, with two cuffs and a common chamber for two hands. It resembles a curved muff. If you start knitting it from elastic bands, you will have to use two sets of knitting needles, knit an elastic band on each of them and another couple of centimeters with the main pattern.

Then you will have to redistribute the loops and knit a common “well” with only five knitting needles to the desired height. Make decreases at the top in exactly the same way as for an ordinary mitten. When knitting a double mitten with knitting needles, you do not need to make a separate cover for your thumbs. Let them all be inside, because it’s more convenient to hold hands.

Have you been able to master knitting mittens? Get started on the men's mitts. A husband or father will need them when driving a car. And when repairing a car in cool weather, this is generally an irreplaceable thing. These mittens give complete freedom of movement, do not affect the sensitivity of the fingers, but still provide warmth.

It is also worth arming yourself with knitting needles and knitting separate caps on your fingers for such mittens. The caps must overlap the length of the mitts so that they can be fastened. On the outside they can be secured with a button, but on the inside of the palm such a fastener will become a hindrance. It's better to use Velcro here because it's flat.

Another reason to knit transformable mittens is the constant need to use a touch phone or tablet. Gadgets are sensitive to the heat of hands, and sometimes you have to expand or contract the image, but this cannot be done with a mitten.

Knitting men's mitts is easy: you don't need any complex patterns, you can get by with a modest garter stitch.

Mittens knitted You can tie it for yourself and your loved ones, because This accessory is always needed. You can knit warm mittens, double winter ones, or thin ones for the off-season. We have compiled a large selection of different mittens so that you can choose the most interesting models. Mittens can be knitted with a jacquard pattern, an openwork pattern or beautiful braids.

Knitting mittens– the process is not complicated, the main thing is to understand the basic knitting techniques. And then you can start experimenting. The easiest way is to knit mittens using stockinette stitch and decorate them with appliqué or embroidery to suit your taste. Embroidery with ribbons or woolen threads looks very beautiful on mittens. Some craftswomen go further; they crochet beautiful appliqués and decorate mittens with beads, rhinestones and multi-colored patterns.

Knitted mittens decorated with braids and arans are real art. Of course, not every craftswoman is able to immediately knit complex patterns like this. But, if you set a goal and practice knitting arans first, then you will certainly be able to knit any pattern. You can do it easier - find a good video - a master class on knitting mittens on youtube.com. At the end of the article we will definitely offer you several videos, maybe you will like them.

For those who do not know how to knit or crochet mittens, the option of knitting mittens on a machine may be suitable. I never thought that you could even make mittens using a knitting machine. But our readers sent several models.

Knitted mittens. Descriptions from our website

Knitted mittens with a star pattern

Traditional “Norwegian stars” will decorate soft mittens. You will need: 50 g each of white and light gray Permin Qual Navia Trio yarn (100% wool, 120 m/50 g); set of double needles No. 3 and No. 3.5.

How to knit mittens with knitting needles with a complex pattern

To knit mittens with knitting needles you will need: 2 skeins of 100 g (each length is about 126 m) of straw-colored yarn; a set of stocking needles number 8 (5 mm) or diameter that will allow you to knit a sample; auxiliary needle for knitting braids.

In addition to magazine works, readers send us many beautiful knitted mittens.

Knitting mittens with our readers

Openwork mittens knitted

Light openwork snow-white ones are perfect for winter with moderate cold (up to -15). Helen's work. Thanks to the weaving of shiny thread, the mittens are reminiscent of the shine of freshly fallen snow in the bright sun, and the presence of wool in the yarn (20%) will not allow fashionistas to freeze even in fifteen-degree frost.

Knitted mittens with owls

These mittens were knitted by Tatyana using Kamtex yarn (Argentine wool).

Knitted mittens with jacquard patterns – the work of Marina Temerova

Always make a sample before starting knitting. This will help you correctly calculate the required number of loops.

Knitted mittens. Master class from Olga

Yarn “Bebe Batik”. Acrylic 100%, knitting needles No. 2.5. We cast on 48 loops, distribute them onto 4 knitting needles, 12 loops on each. We knit with an elastic band 1X1 30 rows. Then we knit 4 circular rows in stockinette stitch.

Knitted jacquard mittens. Lyubov's work

Jacquard mittens. Composition: wool, wool mixture. For an average woman's hand, of medium thickness. Wash by hand in warm water.

Bullfinch mittens. Work by Lyubov Afanasyeva

Mittens “Bullfinches” with pom-poms. Associated with the addition of down thread. The mitten itself is knitted. The “Bullfinch” applique is crocheted and made three-dimensional. The parts are firmly sewn. Perfect for an exclusive gift.

Mittens knitted Patriotic. Lyubov's work

Mittens “Patriotic”. I’ve long wanted to knit men’s mittens with an ornament, I found a suitable pattern, and then conveniently forgot about it in the bustle of things. Well, recently she caught my eye again, and so things went well. Good for a gift for “February 23rd”. Although, some women also want these for themselves.

Children's mittens Funny sheep

Knitting mittens from the fingertips is a great way to get a neat rounded blunt top of the mitten.

This method is distinguished by a unique set of loops, which is also used for knitting socks from the fingertips. To cast on stitches you need 2 knitting needles, which you hold in parallel in your right hand. Make a starting loop, leaving a small end of thread for casting on, and put it on the second needle away from you. Place the ends of the threads in your left hand as with a classic set of loops.

Knitted mittens with openwork pattern

Mittens knitted from goat down and angora.

Knitted mittens with owls. Author Lyubov Afanasyeva

Mittens with “Owls”. The mittens are knitted from yarn from Troitsk “Simple” (wool blend-200m/100g) white in one fold - the main background.

Knitted mittens - interesting models from the Internet

interesting selection for the site 37 children's models only

Knitting pattern:

Mittens “Cranberry” from Nosova Tatyana

Merino yarn 50% merino wool, 50% acrylic, 200m/100g, consumption less than 100g, knitting needles No. 2.5

Mittens knitted with Magic Mirror (designer Kristel Nyberg)

Transformable mittens using Vasama knitting needles

A fashionable model of women's mittens with a free description of knitting with beautiful patterns. But that’s not all, they can easily be transformed into mitten gloves to open your fingers and easily send SMS from a mobile phone, which is convenient for young people, and not only for young people.

Beautiful knitted mittens with a jacquard pattern

Designer: Adrian Bizilia

The mittens are knitted from the bottom up. First, the outer part is knitted, then loops are raised along the inside of the dur-cord and the lining is made.

Both mittens are the same, that is, there is no left and right, which means they can be worn longer.

Mittens knitted

For those who crochet, we suggest you go where you will find several models of crocheted mittens.

Knitting mittens video

How to knit mittens with owls

Double mittens knitted

Mittens are knitted for a 5 year old girl. The yarn used was Pekhorka Children's novelty, knitting needles No. 3.

The video should load here, please wait or refresh the page.

Knitted mittens with a pattern

The mittens are knitted from 100% merino yarn, 50 g/125 m, Italy, using stocking needles No. 3.5.