The return of the men's beanie haircut. Men's haircut "Voyage"

Every season is marked by the emergence of new hairstyles.

Many elements return from the past, and some undergo transformation. One of these transformations is the cap haircut.

Thanks to the stylist Mary Quant, the cap haircut was born. The peak of its popularity falls in the 60s of the last century. Then she was in demand not only among women, but also among men.

The haircut became so famous that it was worn regardless of age. At first, the cap was cut for medium hair, and over time it switched to short hair. More and more fashionistas pulled on flared jeans and asked the master to cut his hair under a cap.

And, as they say, everything new is once fashionable old. Today, the age category of haircut admirers is young people under 25 years old.

Haircut features

This is a hairstyle for those who are not at all indifferent to their appearance and in the morning it’s not a sin to spend a few minutes on styling.

It is not very easy to care for, as it requires daily styling. The uniqueness of the haircut is that it can hide any imperfections.

Young people with very thin, thin hair will add a little volume to this hairstyle. But those who have voluminous hair will gain lightness with the help of a well-cut cap.

Even those who have cheerful curls prefer to cut them into a cap. After which the image becomes more romantic. But here you need to be careful with the length.

If curly or curly hair is cut too short, it will look similar to an African-American hairstyle. Therefore, the length is determined extremely reasonably.

Unfortunately, there is a limitation for those who have coarse hair texture. In this case, a cap haircut will make the appearance sloppy, since the hair will stick out in different directions.

Alternatively, you can use special styling products, but it will take too much effort.

What kind of hat would you like?

Before you come to the salon and immediately get a haircut with a fashionable cap, you should decide on the type.

Asymmetrical. With this variation, one side of the hair remains longer than the other. You just can do it a little asymmetrically with a smooth transition. Or you can do a shocking haircut with an open ear on one side and clearly long bangs on the other.
Short. In this case, the ends are heavily milled, and the cap is not expressed at all clearly. For those who want to have a short haircut, it is better to give preference to a boxing haircut.
Long. This variety provides for elongated hair in the front with a smooth transition into shading in the back area of the head.
Multilayer. This option is used for cutting wavy and curly hair.
With a clear or smooth transition. Here you should focus on the structure of the hair and the shape of the face.

How to be fashionable at home

You don't have to run to the salon and pay a lot of money for style.

The scheme for cutting a cap is quite simple to implement, so it can easily be done at home.

Technique:

Hair is washed and combed according to its growth.
Then the parietal and occipital zones are separated from the temporal zone using a parting. An edging is created.
The hair in the area of the temples and ears is carefully trimmed.
The entire hair is combed back and a border is made at the back of the head. A properly done haircut will have straight hair at the top of the hairstyle and vertical hair in the ear area.
At the final stages, make a round parting from ear to ear. Then start cutting the lower part of your hair at a 45 degree angle.
At the end, all the hair is combed back and straight cuts are made along the line of the cap. Then they are passed through with thinning scissors.

Even with the perfect technique, cutting a cap can look disheveled and careless. Therefore, when choosing this hairstyle, you need to be prepared for the fact that you cannot do without cosmetics for styling.

Let's reveal a few secrets to help.

How to create a stylish hairstyle in three minutes?

for styling you will need a hairdryer, with which you dry wet hair and initially create the basic shape;
then apply mousse or foam for styling and strengthen the stable shape;
if the hair is not manageable, then you can lightly spray it with hairspray at a distance of 20 cm.

By experimenting with haircut elements, you can create a new look every day and look very stylish.

The “Cap” haircut is characterized by long hair at the top of the head, which smoothly transitions into shading at the bottom (picture 1). The transition from short to long hair can be smooth (1a, photo 1) or more clear (1b). The choice of the desired shape depends on the structure of the hair (a clear transition visually increases the volume of the hair), on the shape of the head and face, as well as on the wishes of the client. Regardless of the chosen shape, the haircut always starts from the bottom zone. All hair is combed in a circle from the top of the head and by cutting the hair along the fingers, the border of the “Cap” is determined (picture 2a). Determining the length of the upper hair is done in a circle, including the design of the bangs.

Photo1

The next stage is to perform shading in the lower part of the head, i.e. below the line completed border. When performing shading, the comb should be brought out with its teeth towards itself, after which the hair growth line is “refined” with straight scissors. After this, the top part is trimmed. If there is a clear transition, it will be enough to simply “even out” the two zones with one-sided thinning scissors (photo 3). To create a smooth transition, you should do one of two things: cutting your hair at an angle or cutting your finger hair. Cutting the hair at an angle (picture 3) is suitable for the smooth transition shown in picture 1a. In this case, all hair is pulled parallel to the floor level and cut at an angle of 45°. On the parietal zone, the hair is pulled away from the parting, and on the occipital zone - from the crown in a circle. With a smooth transition of different lengths of hair (picture 4, photo 2), a haircut is performed on the fingers, where the control strands are the edging of the “Cap”, i.e. length of the top hair at the border and length (picture 5).
Hair thinning is performed.

Picture 4. Smooth transition of hair length in a “Cap” haircut

Picture 1. Haircut cap: a-with a smooth transition; 6th with a clear transition; Picture 2. Initial technology for performing the “Cap” haircut: a-determining the length of the upper hair; b- performing shading

Everyone knows that women often change their looks, choosing different haircuts and hairstyles. But today, men also try to take care of their appearance and visit the hairdresser no less often than the fair half of society. Adults choose practical variations of haircuts, teenagers try to follow fashion and show off with fashionable hairstyles. But in most cases, male representatives try to combine practicality and aesthetics.

Many things and details come back to us from the past and come back into fashion. The cap hairstyle was no exception. Once upon a time it was performed equally for everyone and was quickly forgotten by people with the advent of new male models. To date, professional stylists have developed many modifications of this haircut, which can now be considered universal. With the right approach, you can create an attractive retro look or a modern and stylish look.

Many people remember the men's cap hairstyle under the name “bowl haircut.” It is usually associated with images of characters from Russian folk tales and cartoons. And fans of foreign cinema immediately remember the American heroes who chose such a haircut in the 60s.

Inexperienced hairdressers may make mistakes in the length of the cap or leave it unfinished. Some even confuse it with the famous bob haircut. The cap is characterized by a soft silhouette, smooth lines and the need for simple styling. The hair is collected in a round shape, which has a noticeable volume in the crown area. Modern haircut has undergone many changes, but its main features are always striking in various variations.

A beanie haircut is suitable for both a casual outing and a business meeting. Some options with the right styling can be used to create a stylish or daring look. This choice is most often made by teenagers who want to stand out from the crowd. Whatever variation is chosen, the hairstyle will always look courageous and attractive.

The cap is usually chosen by young people under 35 years of age. This style may not be suitable for the older generation, but the skilled hands of a hairdresser will definitely select a suitable modification of the haircut that can emphasize the solid and serious appearance of an adult man.

Pros and cons of hairstyles

A men's cap haircut does not require a certain status or age from its owner. This style can be chosen by any representative of the male half of the population. Even famous actors and music performers prefer a universal hairstyle. The hat, which has returned to fashion, is performed by masters on hair of any length and shade.

Among the main advantages of a haircut are:

A neat and laconic haircut looks great even on unruly strands. The cap is one of the most convenient models to use.

When choosing this style, you should pay attention to the following features:

Haircut can cause some difficulties in execution with thick and coarse hair.
It is not recommended to wear a hat if you have a triangular face type. The rounded silhouette of the model will only emphasize the shortcomings of the angular features.
To ensure that your hairstyle always looks high quality and neat, it should be updated in the salon at least once a month.

These shortcomings, of which there are few, can easily be overcome by the professional hand of an experienced craftsman. With the necessary knowledge and hairdressing tricks, the stylist will be able to make a cap on any hair for any face shape. A properly executed haircut will make a man's look stylish and beautiful.

Varieties

Today, haircuts that are performed in various variations are popular. This allows you to choose the appropriate type of hairstyle for a certain strand structure and face type.

Hats for men can be made in the following options:

A haircut is usually performed with a smooth transition, in which all lines and layers smoothly flow into each other. With a clear transition, all elements of the hairstyle are sharply expressed and have clear silhouettes. The type of haircut is chosen depending on the features of the face or the personal wishes of the client.

Haircut for boys

A great option would be a beanie hairstyle for boys. Youth haircuts are often chosen for children. This model looks practical and modern. With a child's face, the hat makes the image cute and spontaneous.

Boys are usually cut so that their bangs and the rest of their hair are at the same level. The second option involves a smooth transition from shortened bangs to elongated hair at the back of the head. With a smooth transition of strands from the back of the head to the crown, the bangs can be laid to one side.

Children rarely follow fashion, so there are very few variations in children's haircuts. But when watching films, some kids remember the images of their favorite characters and want to be like them. Since the beanie is becoming popular again, you can be sure that your child will love this hairstyle.

A cap haircut can tidy up any hair. She will make sparse strands voluminous, and thick strands light. This model can easily tame unruly hair. It will add romance and elegance to curls and wavy locks. With a universal hairstyle, you can hide imperfections in the upper part of the face.

To ensure that the haircut is in harmony with the face, the following features should be taken into account for each shape:

With every face type, a beanie adds a touch of personality to the overall look. In order for the haircut to be in harmony with the face, you should choose the right modification of the model.

Execution technology

The hat is not easy to make. An inexperienced hairdresser is unlikely to be able to reveal the advantages of a hairstyle. Unskilled hands may miss the finishing touches of a haircut. In order for the model to turn out correct and of high quality, you should seek help from an experienced and reliable stylist.

The haircut is performed as follows:

Sometimes even a properly made hat can look careless and slightly disheveled. It is necessary to understand that it will require styling, which in some cases will have to be done using fixing agents.

Laying methods

To maintain the shape of the haircut, you will have to purchase a brush, hair dryer and hair styling products in advance.

A classic hairstyle is styled with a hairdryer, brushing moistened strands towards or away from the face. You can secure the resulting shape using foam or mousse. Unruly hair should be fixed with hairspray.

The classic version is laid in different ways. The hairstyle can be made asymmetrical. For a youthful look, the strands in the parietal region are lifted and fixed with a cosmetic product. The asymmetrical model is laid straight or on its side.

Sleek hair for men can be done using a wet effect. This look is created along the entire length of the strands or only in the bangs area. To create a wet effect that looks striking with a short haircut, special products are used.

Features of care

The simple yet attractive beanie haircut has become a fashion trend. Men who prefer minimalism and laconicism prefer this model. The hairstyle softens the facial features and makes the overall look sophisticated and romantic. Various modifications of the haircut make it possible to experiment with images.

Attention, TODAY only!

Medium men's haircuts are suitable for all ages, regardless of age or social status. Representatives of the stronger sex of middle and older age more often choose shortened options, and young people choose elongated ones.

The most popular men's haircuts for medium hair are half-box, cap, "Voyage".

Photos of men's haircuts of medium length and a description of the technique for performing them are offered to your attention on this page.

Performing a men's medium-length semi-box haircut (with photo)

To perform a men's half-box haircut, you will need a clipper and straight scissors.

This medium-length men's haircut is performed from the center of the occipital area, first in one direction, then in the other.

Hair cutting uses a hair clipper method. When performing half-boxing with a machine, the hair does not need to be wetted with water. The upper border of the trimmed area should run along the line of the top point of the ears and the occipital protuberance.

The men's half-box haircut at the temples is oriented towards the level of the trimmed occipital area. Then the edging is done on the temples, neck and behind the ears.

Pay attention to the photo: men's half-boxing involves a soft transition from short to long hair.

For a softer transition, smoothly shade the hair 3 cm above the control line. Thinning and straight scissors or a razor are used for this. The hair on the parietal area is cut on the fingers, and then thinned out a little.

During cutting, shading, and thinning, they try to work on the shape of the hairstyle.

As you can see in the photo, a men's half-box haircut should be such as to hide imperfections in appearance, i.e., oval if possible.

A modern version of how to cut a men's half-box haircut

The modern version of the men's half-box involves using a machine only to remove the fluff on the back of the head and refine the edging line.

To make a modern half-box you will need straight and thinning scissors.

The haircut begins with the edging behind the ears, and then the back of the head. Using a machine, the fluff on the back of the head is removed and the edging line is finalized. This is a very convenient method, as it allows even a non-professional to perform edging quickly and efficiently.

The hair on the back of the head is trimmed with thinning scissors using the stripping method.

Very frequent movements with scissors are made along the edging line. Thinning is performed many times, first at the ends of the hair, and then each time deeper into the hair.

As you can see in the photo, the men's half-box hairstyle in the upper right and upper left temporal zones is performed with vertical partings at an angle of 30-45°.

The method is strand by strand. When cutting, you need to focus on the hair of the lower temporal zones. The upper occipital zone is cut on the fingers in the direction from the temples to the back of the head. The strands are separated with horizontal partings, pulling them at an angle of 90° and cutting them off, focusing on the already trimmed hair. Checking in the upper occipital area is performed with horizontal partings. Defects are removed by cutting with “teeth”.

For short haircuts, checking with horizontal partings is the most successful option, because it is difficult to grip the hair with thin strands.

In the parietal zone, holding three strands of hair between four fingers, lift them vertically and cut them in a “herringbone” shape at random. Thinning of the parietal zone is performed with thinning scissors at the roots. Finally, the bangs are edged with “teeth”.

Men's haircut "Voyage" for medium hair and hairstyle photo

To perform a men's haircut "Voyage" you will need straight and thinning scissors.

First you need to randomly draw a horizontal parting from temple to temple. On the back of the head it should go lower. The strands of hair above the parting are gathered into a bun and secured with hair clips. Then, in the lower occipital zone, a strand is isolated, which runs parallel to the horizontal parting, and cut off on the fingers. Its length should be no more than 1.5 cm. The strand is cut in compliance with the cutting direction from the temple to the middle of the back of the head. It will be the main one for the temples and back of the head. Then, using the removal technique, the temples and occipital area are cut to nothing, i.e., a transition is made from the marginal hair growth line at the temples and back of the head to the main (control) strand. At the same stage, edging is performed.

It is best if its line is soft, since this haircut is more romantic than strict.

Then, parallel to the main strand in the upper occipital zone, the next strand is isolated. It is combed out along with the main one and cut at its level with an extension of 1-1.5 mm. The entire parietal area is cut in the same way. Then they comb out all the strands of the parietal zone according to hair growth and make an edging.

Afterwards, the clarity of the haircut is checked by randomly combing out the strands.

All visible differences between hair lengths are eliminated. Finally, the parietal area is thinned using a thinning razor.

Pay attention to the photo: the men's haircut “Voyage” is styled using wax; it is enough to apply the styling product to several strands.

Men's haircut with sudden changes in hair length

To perform a men's haircut with sharp changes in hair length, you will need straight scissors.

The temporal and occipital zones are separated with a zigzag parting.

The parting should start at the face on one side and end on the other, in other words, from temple to temple. The height of the parting should be along the upper edges of the ears. Above the parting, the hair is held together with clips.

The hair below the parting is reduced to nothing, and a border is made all over the head, which should look natural and even somewhat careless.

Then a small strand is isolated in the center of the crown; there should be a diamond at its base. The strand is cut at the desired height, taking into account that it will be the shortest. Then edging is done all over the head. Finally, the hair is blow-dried and the dry hair is trimmed and trimmed with straight scissors. At the same time, the strands seem to be torn off, making them different in length. The differences in length should be noticeable and unconnected.

Then they begin to design the bangs.

To do this, take the first strand and cut it as short and abruptly as possible, with “teeth”.

Hair is cut on the fingers. The length of the strand should be 1.5-3 cm. When the strand is cut, it needs to be combed onto the face and the edge processed again. The second strand is placed on top of the first. It should be longer, but also cut with “teeth”. The third strand can be made thinner and lighter.

Thanks to this cutting method, the effect of multi-layered bangs is achieved.

Then a sliding cut is made along the entire length of the hair with straight scissors.

In order to give the haircut lightness and naturalness, all ends are made with zigzag cuts. At the end, the hair is dried with a hairdryer to set the direction of the strands, then they are styled with hairspray. First, the strands are lifted at the roots with your fingers.

For this haircut, it is better not to use gel and wax, so as not to make it heavier.

Performing a men's haircut “under the cap” (with photo)

To perform a cap haircut, you will need straight scissors.

Execution begins with edging. To do this, the temporal zone is separated from the parietal zone by a parting and a direct edging of the temple is performed. They work well on the edging above the ear.

The length of the hair in a men's cap haircut should be along the base of the ear.

The edging is done in the same way on the other side. Then the hair is combed back and a border is made at the back of the head.

As you can see in the photo, the men's cap haircut should be straight at the edges, and the transition from it behind the ears should be almost vertical.

Then the parietal zone is separated with a straight parting from ear to ear above the lobes. The hair below the parting is cut, highlighting the vertical strands and pulling them 90°. Cut the hair at an angle of 45°.

Haircut of the parietal zone is performed from the middle of the back of the head, first in one direction, then in the other direction.

Then the hair is combed according to its growth and the line of the “cap” is marked with straight cuts. A wide strand is isolated from the top of the head, its length is determined and cut with “teeth”.

When performing a men's cap haircut, all hair on the parietal area should be cut strand by strand, in the direction from the back of the head.

The entire area is cut to the bangs, highlighting the hair in large strands.

How to cut bangs for a men's cap haircut

Before cutting bangs for a men's cap haircut, divide them into several horizontal strands and cut them at different angles.

The bangs are cut in straight cuts.

All hair on the parietal area (previously dried), starting with bangs, is done using the pointing method.

Finally, apply styling mousse to slightly damp hair and then blow-dry using a simple comb. You can do the styling by brushing, but then the image will be softer and not so bright.